|
|
GeneralConfiguration / InitializeWriteSequence
(Type 3) INITIALIZE WRITE SEQUENCE
Reconfiguration Initialization sequences
| DL1 SD
| 0x2, 0x15, 0x86, 0x77, 0x21, 0xFF
| | DASH2
| 0x9E, 0x01, 0x24, 0xF5, 0xCC, 0x11
| | DASH3
| 0xA4, 0x35, 0x24, 0x13, 0x42, 0x8E
| | SPEEDBOX
| 0xDD, 0xB0, 0x0B, 0xBA, 0xBE, 0x69
| | DASH2 PRO
| 0x2, 0x15, 0x86, 0x77, 0x21, 0xFF
| | DASH4PRO
| 0x13, 0x26, 0x78, 0xAE, 0xBC, 0x64
| | DL1 SPORT
| 0x5A, 0x9A, 0x10, 0xDD, 0x4A, 0xDE
| | ANALOG8
| 0x2, 0x6, 0x9, 0x97, 0x27, 0xCF
| | GPS2
| 0x88, 0x64, 0x21, 0x12, 0x46, 0x88
| | THERMO12
| 0xA2, 0x15, 0x25, 0x10, 0x68, 0x42
| | ANALOG16
| 0x72, 0xD7, 0x85, 0x24, 0x96, 0x52
| | SPEEDSENSOR10
| 0x63, 0x8A, 0x6F, 0x32, 0xAC, 0xDC
| | RT Live config
| 0xAB, 0xBC,0xCD, 0x21, 0xFF
| | RT Live V2
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x01
| | GNSS2
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x02
| | Base Station
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x03
| | RT Connect
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x04
| | RTSS
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x05
| | RTSS Lite
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x06
| | EMCC
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x07
| | RT COMMS BACKUP
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x08
| | TM RECEIVER
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x09
| | SPEED100
| 0xA8, 0xB1, 0x31, 0x22, 0x1F, 0x0A
| | DASH4PRO FD
| 0x13, 0x27, 0x79, 0xAF, 0xBD, 0x65
| | DL1 EVO
| 0x2, 0x15, 0x86, 0x77, 0x22, 0x01
| | SPEEDBOX2
| 0xC7, 0xA9, 0xDC, 0x7B, 0x5E, 0x18
|
Reflashing initialization sequences
| DL1
| 0xFF, 0x21, 0x77 ,0x86, 0x15, 0x2
| | DASH2
| 0x4F, 0xB5, 0xC9, 0x71, 0x69, 0xB2
| | DASH3
| 0x8E, 0x42, 0x13, 0x24, 0x35, 0xA4
| | DASH4PRO
| 0x64, 0xBC, 0xAE, 0x78, 0x26, 0x13
| | SPEEDBOX
| 0xBA, 0xDA, 0x55, 0xBA, 0xBE, 0x69
| | DASH2 PRO
| 0xFF, 0x21, 0x77, 0x86, 0x15, 0x2
| | GPS2
| 0xCA, 0x86, 0x42, 0x13, 0x57, 0x9B
| | THERMO12
| 0xB5, 0x81, 0x15, 0x58, 0x26, 0x16
| | ANALOG16
| 0xA6, 0x75, 0x45, 0xB3, 0x36, 0x16
| | SPEEDSENSOR10
| 0x83, 0xFC, 0x84, 0x3E, 0x37, 0x28
| | RT Live
| 0xFF, 0xBB, 0xCC, 0xDD, 0x15, 0x2
| | RT Live V2
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | GNSS2
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | Base Station
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | RT Connect
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | RTSS
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | EMCC
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | RT COMMS BACKUP
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | TM RECEIVER
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C *
| | SPEED100
| 0x58, 0x51, 0x01, 0x12, 0x1C, 0x2C
| | DASH4PRO FD
| 0x64, 0xBD, 0xAF, 0x79, 0x27, 0x14
| | DL1 EVO
| 0xFF, 0x21, 0x77 ,0x86, 0x15, 0x3
| | SPEEDBOX2
| 0xAC, 0xEB, 0x78, 0xCB, 0xD6, 0x3A
|
This is a random sequence of bytes that tell the system to prepare itself to be configured,
this is in case the target system needs to prepare itself for a reflash and also as a security measure to ensure that the system is being intentionally written to.
* Note that all LTE board based products use the same firmware and have the same reflash init code
Disk access initialization sequences
This applies only for devices with inbuilt disk.
Data 6-11 = 0x02, 0x15, 0x86, 0x98, 0x42, 0xFE
|
My basket |
Checkout |
Add to email list
Edit
History
Print
Download (.HTML)
PDF