Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

VIDEO4Technical / TechnicalSpecification

Technical Specification


ConstructionCustom designed injection molded black ABS
Video inputs (electrical)Standard composite video 1v p-p, Either PAL or NTSC
Video encoding standardMPEG2, constant bit rate with over-ride in the case of slow cards. Frame format, GOP length of 15, IP and B frames
Audio inputs (electrical)Standard line level inputs with a maximum of 1v
Audio encoding standardMP2 layer 2, typically referred to as MP2
MemoryRemovable CF card, formatted as FAT32. Most high speed types are compatible, SanDisk cards are recommended.
Status indicatorsLEDs on the front panel to indicate, power supply OK, system running, incoming serial data available, GPS signal is locked, currently recording video, CF card in use (reading or writing)
Processor900MHz, 64bit DSP, 64M DDR RAM
Data portdata rate is upto 5 Mbit and back compatible with RS232 – compatible with all current Race Technology hardware
Power supply requirementsThe main unit takes about 5W, at a nominal 12v this equates to about 400mA
Page last modified on May 21, 2009, at 01:18 PM