Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

ConfiguringAnalogModule8 / ConfiguringForUseWithDASH2

Configuring for use with DASH2


When using the ANALOG8 with a DASH2,where the analogue inputs are set as a fixed channel, the ANALOG8 must be configured to ensure that the same channel names are not used.

Analogue channels 1, 2, 3 and 4 on the DASH2 are output as channels 17, 18. 19 and 20. If the dash is standalone the default configuration shipped on the ANALOG8 will work perfectly. If the DASH2 is also connected to a DL1 Mk1/Mk2/Sport data logger, please consult the information found here for how to configure the module.

Page last modified on January 25, 2019, at 01:44 PM