GPS
| Outputs position, speed, position accuracy and speed accuracy every 200ms with no interpolation.
|
Data Upload
| mobile data network connection to online cloud storage
|
Internal Memory
| 64Mbyte, enough to buffer over 12 hours of data when there is no mobile data network connection
|
Logging Control
| Set to log whenever external power is applied, when movement occurs, or manual control
|
Analogue Inputs
| 8 external inputs, 4 inputs 0.2v-5v, 4 inputs 0.4v-12v. All inputs are protected to twice maximum input voltage.
|
Sample Rates to cloud storage
| 20Hz for RPM and analogue inputs.
|
Maximum No Channels
| No hard limit, potentially 100s
|
Power Supply Requirements
| 12v nominal input, minimum of 9v, maximum of 20v. Current consumption 200mA at 12V in operation, and 15mA at 12V in sleep mode. +5v Reference Out Maximum current draw 100mA.
|
RPM Signal (High Level)
| Triggered by fast voltage transients. Can be connected directly to the low tension side of the ignition coil.
|
RPM Signal (Low Level)
| Triggering voltage requires a low input of <1v and a high input of >4v and 15v maximum. Suitable for connection directly to most ECU tacho outputs. Maximum input frequency >300Hz.
|
Case Construction
| Injection moulded plastic
|
Connector Type
| 3.5mm pitch lever connectors
|
Serial Port
| Full speed serial port, compatible with other Race Technology products. Outputs data for display on in vehicle DASH unit. Also used for re-flashing, diagnostics and configuration. Also used to connect to an ECU adapter for logging additional data.
|
CAN Port
| Add CAN output data from other devices or engine data from vehicle CAN bus. 1Mbit CAN speed
|
SIM Card
| User accessible, any data SIM can be used
|
Antennas
| Separate external mobile data network and GPS antenna connections, for optimum performance
|
Telemetry Update Rate
| Typical update rate to website browser is 5Hz, live data upload to PC software is 10Hz. Depending on signal and local internet speeds.
|
Working Temperature
| -20°C to 50°C
|
Dimensions
| 123mm wide, 70mm deep (excluding rear connectors), 34mm high
|
Weight
| 150g
|