DL1 PRO

Technical Specification

Memory SD memory card, can be SD or SDHC. Up to 32GB. FAT32 only
GPS Outputs position, speed, position accuracy and speed accuracy at 10Hz (optional 20Hz enhancement) with no interpolation. GPS tracking loops optimised for applications up to about 4g. tracking of all satellites in view. 20Hz raw data storage for post-processed operation
GPS Antenna Magnetic base, 3.3v active antenna with SMA connector.
Analog Inputs 12 external inputs, 0-25v. All inputs are protected and have a 1st order filter with corner frequency of 550Hz. Accuracy = 0.4% of measured voltage +-20mV. Sample rate 100Hz as standard, 1kHz optional..
Frequency Inputs 4 external frequency inputs with a maximum input frequency >2kHz. Triggering voltage requires a low input of <1v and a high input of >4v and 15v maximum.
Lap Marker Input Triggering voltage requires a low input of <1v and a high input of >4v and 25v maximum.
Start Sample Input Triggering voltage requires a low input of <1v and a high input of >4v and 25v maximum
Low level outputs 4 low side drivers updating at 10Hz, each capable of driving 500mA.
Power Supply Requirements 12v nominal input, minimum of 10v, maximum of 23v (higher voltages can be accommodated if specified at the time of ordering). Current consumption of about 180mA including GPS, dependant on SD card requirements.

+5v Regulated output for driving sensors. Maximum current draw 500mA x 2.

Ignition In Signal (High Level) Designed to connect directly to negative terminal of ignition coil. Can also fire from fuel injectors and from CD ignition systems.
Ignition In Signal (Low Level) Triggering voltage requires a low input of <1v and a high input of >4v and 15v maximum. Suitable for connection directly to most ECU tacho outputs. Maximum input frequency >300Hz.
Case Construction Custom aluminium housing with integral mounting holes. 127mm x 89mm x 30mm
Connector Type 19 way and 24 way sealed metal Binder connectors.
Serial Port 1 User configurable for messages. Transmission and reception of RT format messages at 115.2k-921.6k baud
Serial Port 2 Used for reception of RT messages at a fixed baud rate of 115200
CAN Port Message reception and transmission up to 1MBit/s
Computer communication USB port for reflashing, reading/writing configuration, viewing live data, and downloading files.
Accelerometers 3 axis, precision digital output. Guaranteed 2g minimum full scale on both axes. Resolution of 0.005g. Optional 6g sensor available as a factory option.
Vibration Factory tested at 25g, 50Hz sinusoid for 5 minutes (without compact flash card inserted).
Temperature Factory tested from -20°C to 70°C