I cannot open theis application.
I'm using version 8.5.280 of Analysis.
I woulkd like to know what I can do to get this application working.
I'm trying to design an overlay to use with my race videos.
Thanks
I get the following error:
Run-Time Error '429'
ActiveX component can't create object
The error details are:
Nom d’événement de problème: APPCRASH
Nom de l’application: VIDEO4 Configuration.exe
Version de l’application: 2.3.0.9
Horodatage de l’application: 52270d04
Nom du module par défaut: StackHash_c721
Version du module par défaut: 0.0.0.0
Horodateur du module par défaut: 00000000
Code de l’exception: c000041d
Décalage de l’exception: 75124f11
Version du système: 6.1.7601.2.1.0.768.3
Identificateur de paramètres régionaux: 3084
Information supplémentaire n° 1: c721
Information supplémentaire n° 2: c721c873b4b6f1e4967ac918a076364a
Information supplémentaire n° 3: c88a
Information supplémentaire n° 4: c88a14a996b60e17460ec6c685013eed
Video export overlay designer
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
Hi there,
It is rare that we see an issue similar to this. If you haven't already I would try to uninstall the current version of RT V8.5 and download a fresh version from our website,
This can be found Here
If this doesn't solve the issue, please contact me via email directly and I shall help further.
sam@race-technology.com
Kind Regards,
RT Support (SK)
It is rare that we see an issue similar to this. If you haven't already I would try to uninstall the current version of RT V8.5 and download a fresh version from our website,
This can be found Here
If this doesn't solve the issue, please contact me via email directly and I shall help further.
sam@race-technology.com
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
Hi,
Considering everything I just went through getting the GoPro export to work here: http://www.race-technology.com/forum/vi ... php?t=3221
I would rather not change Analysis version just yet.
I will contact you by email.
Thanks.
Considering everything I just went through getting the GoPro export to work here: http://www.race-technology.com/forum/vi ... php?t=3221
I would rather not change Analysis version just yet.
I will contact you by email.
Thanks.
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
Just to make sure
OK so now I'm using version 280. I don't know which setup file this corresponds to but I have the following in my temp file:
150
136 From your email
110
079
If I install (update) to setup 136 this will install Analysis 315.
315 will not generate the audio delay error in 29.99 FPS and it will allow the overlay designer to work ?
Just making sure.
Thanks
150
136 From your email
110
079
If I install (update) to setup 136 this will install Analysis 315.
315 will not generate the audio delay error in 29.99 FPS and it will allow the overlay designer to work ?
Just making sure.
Thanks
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
OK !
I'm on version 315 of Analysis and the video export works fine.
I can now also open de Video Export Layout Designer.
I can load a default layout in regular resolution.
I can also load the same in HD.
I cannot pan either of those. Not so bad in the regular resolution as it fits all on my screen. Not the case for the HD layout.
I tried changing the screen resolution of my computer but that does not make a difference.
Can this be fixed easily ?
Can I design (Modify the default GT1080HDMPH) in regular resolution and use it on top of an HD video ?
Thanks again.
I'm on version 315 of Analysis and the video export works fine.
I can now also open de Video Export Layout Designer.
I can load a default layout in regular resolution.
I can also load the same in HD.
I cannot pan either of those. Not so bad in the regular resolution as it fits all on my screen. Not the case for the HD layout.
I tried changing the screen resolution of my computer but that does not make a difference.
Can this be fixed easily ?
Can I design (Modify the default GT1080HDMPH) in regular resolution and use it on top of an HD video ?
Thanks again.
Sorry, I thought i'd answered this.
Just with regard to the inability to pan, do you see the scroll bars but they done work, or, do you not see scroll bars at all?
You can't modify a HD layout in SD as, as soon as you load the HD layout, even if you set view to SD, it will switch the view to HD.
As I said, it does work fine for me with the same software versions you have so it's nothing to do with the version.
Any issues with any other software that might use scroll bars?
Spreadsheets/Word Processors etc.
M.
Just with regard to the inability to pan, do you see the scroll bars but they done work, or, do you not see scroll bars at all?
You can't modify a HD layout in SD as, as soon as you load the HD layout, even if you set view to SD, it will switch the view to HD.
As I said, it does work fine for me with the same software versions you have so it's nothing to do with the version.
Any issues with any other software that might use scroll bars?
Spreadsheets/Word Processors etc.
M.
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
I tried to show this visualy like you did but I'm clearly not as good with screen captures.
I can see the bars and I can move them. Both vertically and horizontally but the workspace does not move.
I cannot get to the loaded GT layout at the bottom to modify it and make adjustment. Different resolution does not help.
Thanks
I can see the bars and I can move them. Both vertically and horizontally but the workspace does not move.
I cannot get to the loaded GT layout at the bottom to modify it and make adjustment. Different resolution does not help.
Thanks
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
It's both the horizontal and the vertical.
All other applications are OK.
I don't know about other RT applications as they usually don't use sliders.
I was having this issue before. I believe this started around the time of 8.5.
It works on my 8.2 version of analysis installed on the old XP computer I take to the track. If it had the HD setup I would design the layout on that version but I understand there is no forward compatibility starting at 8.5.
Thanks.
All other applications are OK.
I don't know about other RT applications as they usually don't use sliders.
I was having this issue before. I believe this started around the time of 8.5.
It works on my 8.2 version of analysis installed on the old XP computer I take to the track. If it had the HD setup I would design the layout on that version but I understand there is no forward compatibility starting at 8.5.
Thanks.
Hmm, not something I've ever seen. I think there are vertical scroll bars in analysis when you have lots of sessions loaded so might be worth a quick check.
Might be worth a new post for this specific issue as others might recognise it or would be more easilly spotted by RT who may have come across if before. As your having to use an older/hybrid version of the software to get around your other issues though it might be tough to address until you can install the latest (next) release.
M.
Might be worth a new post for this specific issue as others might recognise it or would be more easilly spotted by RT who may have come across if before. As your having to use an older/hybrid version of the software to get around your other issues though it might be tough to address until you can install the latest (next) release.
M.
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
Support
Hello,
We have no other reports with the slider bars not working and most of the office PC are running windows 7 so it is difficult to fix. I think the best way forward is for me to connect to the computer over the internet using teamveiwer which is installed with the Race Technology package.
Please call the office on the number off the website and ask for Kieran.
Kind regards,
Support
We have no other reports with the slider bars not working and most of the office PC are running windows 7 so it is difficult to fix. I think the best way forward is for me to connect to the computer over the internet using teamveiwer which is installed with the Race Technology package.
Please call the office on the number off the website and ask for Kieran.
Kind regards,
Support
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 56 guests