DTA T2 ecu to Dash2 via CAN interface

Westfield 20XE
Posts: 6
Joined: Sun Feb 19, 2023 8:10 pm

DTA T2 ecu to Dash2 via CAN interface

Postby Westfield 20XE » Wed Mar 15, 2023 2:37 pm

Hi,

Can anyone advise on what ECU to select from the drop down box when selecting ECU interface from the Dash2 configuration software?

DTA T & S series are not listed it seems, even though my CAN interface is for the T2 ECU.

Cheers

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: DTA T2 ecu to Dash2 via CAN interface

Postby racetec » Thu Mar 16, 2023 9:29 am

DTA S40 S60 S80

Not DTA S40 S60 S80 - serial

DTA S-series and T-series outputs are the same for the purpose of this endeavour.

Westfield 20XE
Posts: 6
Joined: Sun Feb 19, 2023 8:10 pm

Re: DTA T2 ecu to Dash2 via CAN interface

Postby Westfield 20XE » Thu Mar 16, 2023 10:23 am

That's great thanks, I'll take a look later and see how I get on.

Westfield 20XE
Posts: 6
Joined: Sun Feb 19, 2023 8:10 pm

Re: DTA T2 ecu to Dash2 via CAN interface

Postby Westfield 20XE » Thu Mar 16, 2023 1:45 pm

I've changed the ECU interface settings to DTA S40 S60 S80 and ticked the sensors I want to view/receive from ECU.

I've then gone to the LCD data option and selected the appropriate corresponding options and selected where/what screen I want them on.

Uploaded and sent configuration to my Dash2 which I can see has changed but unfortunately still no data being shown or received from the ECU.

I've gone into the DTA T2 software to confirm the CAN settings are as per Race Technology settings.

I've confirmed I have a 12v and ground and that it's installed correctly and that the high and low wires are correctly installed in pins 16 & 17.

Is there something daft I'm missing regarding the configuration?

Westfield 20XE
Posts: 6
Joined: Sun Feb 19, 2023 8:10 pm

Re: DTA T2 ecu to Dash2 via CAN interface

Postby Westfield 20XE » Thu Apr 20, 2023 7:35 pm

Help!!!!!!!

5 weeks later and I'm still no closer to enabling my ECU data to appear on the Dash2.

Has anyone else used the CAN interface with the DTA T2 ECU??

I've submitted a tech support request but that seems to be going nowhere??

I also noticed today that the display is showing 2 miles on the odometer and trip which is odd as it was 0 and the car hasn't turned a wheel apart from spinning a wheel by hand??

Any ideas??

Thanks

Westfield 20XE
Posts: 6
Joined: Sun Feb 19, 2023 8:10 pm

Re: DTA T2 ecu to Dash2 via CAN interface

Postby Westfield 20XE » Fri May 19, 2023 5:43 pm

Unfortunately this is still an on going issue having started the tech support request on Maech 14th.

The CAN interface was returned for inspection on 3rd May and I've yet to hear from anyone?

I've sent two emails and made a call but still no news about any progress or anything in fact.

This has left me somewhat disappointed so far as I was so enthusiastic about the Dash2 and company.

I would very much appreciate if anyone from Tech Support could reach out to me.

Thanks.


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 37 guests