Hi,
I recently installed a Racetech 2 for a customer, The speedo works perfectly untill 55mph when it just goes blank after that. Do you have any idea what may cause this?
Info.
Vauxhall Nova
Corsa C Front wheel speed sensor to a OEM vauxhall conditioning relay that converts the VR sensor to hall effect output. Then a pullup on the output.
Regards,
Nicky
Racetech 2 Speed Dropping out at 55mph
Re: Racetech 2 Speed Dropping out at 55mph
I had a similar issue on my Noble.
Solution was to reduce number of rotating teeth on axle from 10 to 4. Basically frequency count became too high at 50mph ish.
Solution was to reduce number of rotating teeth on axle from 10 to 4. Basically frequency count became too high at 50mph ish.
Re: Racetech 2 Speed Dropping out at 55mph
Hi, Thanks but that inst really a valid option as it picks up on the OEM ring on the driveshaft.. I hope theres a easier solution..I had a similar issue on my Noble.
Solution was to reduce number of rotating teeth on axle from 10 to 4. Basically frequency count became too high at 50mph ish.
Re: Racetech 2 Speed Dropping out at 55mph
Get a scope and check the frequency of the hall effect output.
Re: Racetech 2 Speed Dropping out at 55mph
Get a scope and check the frequency of the hall effect output.
That is the plan, But social distancing is making it pretty hard to do so at the moment. I thought id check in on here in the meantime.
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 8 guests