Hi Guys, having trouble trying to figure out how to set the value, the hi temp and low oil press alarms will activate.
cheers John
Setting alarms on Dash2 Pro
Re: Setting alarms on Dash2 Pro
Hi John
Please see our knowledge base for information regarding setting the alarms:
https://www.race-technology.com/wiki/in ... AlarmLevel
There is further information available via the link at the bottom of the page.
Support (AH)
Please see our knowledge base for information regarding setting the alarms:
https://www.race-technology.com/wiki/in ... AlarmLevel
There is further information available via the link at the bottom of the page.
Support (AH)
Re: Setting alarms on Dash2 Pro
hi, yes i found that and set it all accordingly, but i dont full understand the unit, condition, value settings. etc
what value should i set them at to have the temp alarm come on at 100dg C.
and the low oil press alarm to come on at 20psi
thats the part i cant figure out sorry.
cheers John
what value should i set them at to have the temp alarm come on at 100dg C.
and the low oil press alarm to come on at 20psi
thats the part i cant figure out sorry.
cheers John
Re: Setting alarms on Dash2 Pro
Hi John. If you want the temperature reading to come on at over 100 degrees C on a particular channel. Select the channel from the drop down menu, set the units to 'C' and set up the condition for '>' and the value to 100.
For pressure to come on below 20 psi, do the same, but select 'psi' for the units and '<' for the condition and '20' for the value.
Martin
For pressure to come on below 20 psi, do the same, but select 'psi' for the units and '<' for the condition and '20' for the value.
Martin
Re: Setting alarms on Dash2 Pro
Thanks Martin got it this time, it was my own stupid non com illit self, i got my grand son to look at it and he fixed it in 2 secs little shite. lol.
cheers John
cheers John
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 83 guests