Display AND Log GPS + IMU G-G Simulatneously

phantomjock
Posts: 27
Joined: Sat Sep 17, 2016 9:37 pm

Display AND Log GPS + IMU G-G Simulatneously

Postby phantomjock » Wed Jan 08, 2020 3:33 pm

My questions:
1. Is it possible to get GPS and IMU G-G display directly from the Data Loger? Is it possible to simultaneously Display this data and log for post session?
Could the data be displayed on a secondary display (slave) as shown here:
Image
2. My vehicle does not have an ECU - so that link would not be available.
3. To further "complicate" (or maybe a possible solution) - I have 2 DL1 Data Loggers, might that make it easier? Use one to display the GPS and IMU, and one to Log? I would think one to the Dash (the one to LOG - only, the other one to Display a separate GPS/G-G diagram.

Thanks and Regards, Jim

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Display AND Log GPS + IMU G-G Simulatneously

Postby racetec » Wed Jan 08, 2020 4:33 pm

Hi

Where is the IMU in this scheme? Do you mean the accelerometer in the DL1?
Yes, you can log data whilst displaying on the dash and two screens can be used.

Support (AH)

phantomjock
Posts: 27
Joined: Sat Sep 17, 2016 9:37 pm

Re: Display AND Log GPS + IMU G-G Simulatneously

Postby phantomjock » Tue Jan 21, 2020 3:44 pm

Yes - the accelerometer in the DL1.
Thanks for the answer.
Cheers - Jim


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 5 guests