Setting alarms on Dash2 Pro

kaspa
Posts: 3
Joined: Sat Apr 21, 2018 11:14 pm

Setting alarms on Dash2 Pro

Postby kaspa » Sun May 12, 2019 7:26 am

Hi Guys, having trouble trying to figure out how to set the value, the hi temp and low oil press alarms will activate.
cheers John

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Setting alarms on Dash2 Pro

Postby racetec » Mon May 13, 2019 12:05 pm

Hi John

Please see our knowledge base for information regarding setting the alarms:
https://www.race-technology.com/wiki/in ... AlarmLevel

There is further information available via the link at the bottom of the page.

Support (AH)

kaspa
Posts: 3
Joined: Sat Apr 21, 2018 11:14 pm

Re: Setting alarms on Dash2 Pro

Postby kaspa » Mon May 13, 2019 8:42 pm

hi, yes i found that and set it all accordingly, but i dont full understand the unit, condition, value settings. etc
what value should i set them at to have the temp alarm come on at 100dg C.
and the low oil press alarm to come on at 20psi
thats the part i cant figure out sorry.
cheers John

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Setting alarms on Dash2 Pro

Postby racetec » Wed May 15, 2019 10:17 am

Hi John. If you want the temperature reading to come on at over 100 degrees C on a particular channel. Select the channel from the drop down menu, set the units to 'C' and set up the condition for '>' and the value to 100.

For pressure to come on below 20 psi, do the same, but select 'psi' for the units and '<' for the condition and '20' for the value.

Martin

kaspa
Posts: 3
Joined: Sat Apr 21, 2018 11:14 pm

Re: Setting alarms on Dash2 Pro

Postby kaspa » Thu May 16, 2019 5:36 am

Thanks Martin got it this time, it was my own stupid non com illit self, i got my grand son to look at it and he fixed it in 2 secs little shite. lol.
cheers John


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 5 guests