Dynamic zoom

mebilloz
Posts: 26
Joined: Tue Mar 22, 2011 4:57 am
Location: Austalia

Dynamic zoom

Postby mebilloz » Thu Jan 10, 2013 6:42 am

Hi All

In the 'General' window with data displayed (Using analysis 8.5) rather than adding track markers etc to split the data file up, is it possible to do a 'Dynamic Zoom' into an area of data?

I assume it can, just cannot seem to find it.

Thanks

Bill

Support

Support

Postby Support » Thu Jan 10, 2013 9:51 am

Hello,

you have the window zoom in the track map to quickly zoom into sections manually but if you want it to work dynamically you need to add markers. Once the markers are added and the track map is set to interactive the track map will dynamically zoom into the section selected.

kind regards,
Support (K)

mebilloz
Posts: 26
Joined: Tue Mar 22, 2011 4:57 am
Location: Austalia

Postby mebilloz » Thu Jan 10, 2013 10:08 am

Thanks for the reply, but I was not specifically wanting to zoom into the track map itself, but a section of the data displays.
For example, say I have Long accel, Lat accel, and rpm shown on screen for a lap of a track and I want to have a quick look a small section of this data in more detail. The equivilent of the zoom window on the track map window is what I am looking for. If I add track markers I can then pick sectors to effectively zoom in, but it would be nice at times to zoom in further without needing to add more sectors.

Thanks

Bill


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 7 guests