No RPM on Dash 2 with DL1 Sport
Posted: Mon Mar 08, 2021 5:42 pm
I’m having an issue getting my Dash 2 display RPM when using it conjunction with the ECU interface and a DL1 Sport.
With my ECU interface plugged into my Dash 2, Emerald ECU, and DL1 Sport the dash doesn’t register any RPM but the water temp from the ECU is happily shown. I’ve been through the instructions on the settings for the Dash 2 and the DL1 and I am sure I have them correct for all devices working together,
If I plug the Dash 2 into the ECU interface and my Emerald ECU, I happily get the RPM and water temperature for the ECU although the water temp initially goes to go 6513 and then counts down till it gets to the correct temperature.
I’d value any input as I’d really like to get the data logger working with my Dash 2.
With my ECU interface plugged into my Dash 2, Emerald ECU, and DL1 Sport the dash doesn’t register any RPM but the water temp from the ECU is happily shown. I’ve been through the instructions on the settings for the Dash 2 and the DL1 and I am sure I have them correct for all devices working together,
If I plug the Dash 2 into the ECU interface and my Emerald ECU, I happily get the RPM and water temperature for the ECU although the water temp initially goes to go 6513 and then counts down till it gets to the correct temperature.
I’d value any input as I’d really like to get the data logger working with my Dash 2.