Fuel Gauge Help
Posted: Fri Oct 08, 2021 8:15 am
Hi. I'm currently setting my fuel level sensor, but I'm having difficulty getting the dash to display the level.
I'm not able to drain and refill the tank so I have a spare fuel level sensor connected to adjust and take readings from. I have the sensor connected to the dash 5v output with a 1k resistor. There are 12 small lines on the level sender which I took readings from. Once I upload the figures to the dash it will read the high and low but nowhere in-between. I've tried changing the max rate of change from 1-10 and the filtering time from between 1,3,5 & 10 seconds but I'm not having much joy. Is there something obvious I'm missing?
I'm not able to drain and refill the tank so I have a spare fuel level sensor connected to adjust and take readings from. I have the sensor connected to the dash 5v output with a 1k resistor. There are 12 small lines on the level sender which I took readings from. Once I upload the figures to the dash it will read the high and low but nowhere in-between. I've tried changing the max rate of change from 1-10 and the filtering time from between 1,3,5 & 10 seconds but I'm not having much joy. Is there something obvious I'm missing?