Power Source
Power Source
Ok this is probably a stupid question but anyway I’m currently wiring up my dash 2 and sensors which are Race Technology sensors, Has the power supply to these sensors be 5v or 12v ? The packaging says 5v but when looking it up online it’s saying 12v so not sure which to fit with thanks
Re: Power Source
Which sensors specifically?
Re: Power Source
Oil temp water temp boost and wheel speed sensor
Re: Power Source
The wheel speed sensor connects to 12v, the others all connect to 5v.
Martin
Martin
Re: Power Source
Hi...there are power management chips from companies like Maxim with multiple outputs, although your current draw requirements means that any such monolithic chip will require augmentation with external transistors, etc.
Bear in mind that you're asking for 300W PER OUTPUT, which is not going come in a small form factor, given, say 10% efficiency, and 3 outputs, the box has to dissipate a minimum of 90W on its own.
turnkey pcb assembly
Bear in mind that you're asking for 300W PER OUTPUT, which is not going come in a small form factor, given, say 10% efficiency, and 3 outputs, the box has to dissipate a minimum of 90W on its own.
turnkey pcb assembly
Return to “Sensor-related questions”
Who is online
Users browsing this forum: Google [Bot] and 15 guests