Page 1 of 1

Dash2 charge light

Posted: Mon Jan 18, 2021 10:07 am
by Samueljon
Morning,

I’ve recently installed a dash2 into my Nissan s14, even though the alternator is chucking out 14/15v the light seems to stay on.

After having a search on here it looks like someone said about running a 5ohms 24v resistor I fitted that and the light has remained on, best move is to just keep reducing the ohms in the resistor?

Re: Dash2 charge light

Posted: Mon Jan 18, 2021 4:30 pm
by Support
Hello - Have you checked the alternator warning input wire, on the dashes wiring harness, is receiving any voltage from the alternator yet? If you have checked and the problem persists, let me know on the following address: daniel AT race - technology dot com