I bought a Dash2pro recently and spent a lot of time setting it up in my Lotus Elise MY2003 with Rover-engine. Finally I have the things running, but without calibration of the analogue-readings yet.
Does anyone know how I can test the built in GPS without moving the car?
I just put the antenna on a window sill (outside, facing south) and go to the "Test"-menu. I get following values
VEL jumping between .5 and 1
POS 1.414
ALT 1.11
In normal mode I get (on screen 4)
LAT -0.0
LONG -0.2
In the configuration software I have set
GPS receiver data to Take from units built in inputs and sensors
Lap timing data to Take from units built in inputs and sensors
The left edge of the Dash shows four vertical bars next to the antenna-symbol - seems to be OK.
Do I need to set something else in the configuration to get GPS working or is everything OK and I just have to drive the car?
Any help appreciated,
Karl
How to test GPS
How to test GPS
Lotus Elise S2 w Rover engine, Dash2 pro
Re: How to test GPS
Hello Karl
Everything is fine, you just need to drive the car.
Everything is fine, you just need to drive the car.
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 19 guests