DL1 Mk2 to Mk3 Adapter

Armaki
Posts: 11
Joined: Wed May 21, 2014 7:26 pm

DL1 Mk2 to Mk3 Adapter

Postby Armaki » Tue Nov 24, 2015 8:46 pm

Hi Guys,

I have a DL1 Club (Mk3), for which I have prepared wiring looms in 3 rally cars.
I recently bought an additional DL1 Mk2, to reduce the trouble of moving the unit from one car to the other the whole time.

If i am not wrong, mk2 and 3 are using the same connector, right?
Is there an adapter or a re-wiring option available, in order to make both of the DL1's compatible with the looms i already have? (obvsiously, not all connectors will be functional, due to the different specifications of the units)
Is it possible to find a "female" connector, as the one on the DL1 but for wires, in order to built my own adapter?

Thanks

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Postby Support » Wed Nov 25, 2015 11:15 am

Hi there,

Yes the DL1 Mk2 and Mk3 indeed do share the same connector, however there are some subtle differences with regards to wiring.

We do not have any adaptors for the wiring harness in stock. We could quote for a price on this if you wish.

We could also supply you with the bare female connectors on the rear of the DL1 if you wish to make your own adaptor loom.

Please contact me on sam@race-technology.com if you would wish to discuss it further.

Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support


Return to “Installation questions”

Who is online

Users browsing this forum: No registered users and 17 guests