Made up a quick windshield mounting bracket for the DASH1, so it's easy to swap between cars/demo/etc.....
Picked up a RAM mount here:
http://www.gpscity.com/item-npi-locking ... 04-224.htm
plus small piece of scrap aluminum =
Didn't have any tools to countersink the bolts to attach the RAM mount so I spaced off the DASH1 with some rubber grommets from the hardware store. While I was there I also got a couple of black nylon washers so the 4mm bolts wouldn't dig into the nice annodized aluminum casing.
Found out tongiht that the backlight on the DASH1 is pretty nice; first time I've used it when it was already dark outside.
Just sharing.
Quick DASH1 windshield brkt
Quick DASH1 windshield brkt
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
Turby wrote:Simply use a larger drill bit if you want a quick counter sink.
Yes, I know but the largest one I had on hand wasn't big enough.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 40 guests