Hello,
I tried to reflash my AX22 IOT be able to log altitude as well.
I downloaded the version 7.1.39 software package and there doesnt seem to be anything missing except *hex files.
So where can I find those?
Or do they have to be purchased?
Regards,
Dennis
AX22 reflash version 7
Firmware AX22
Hi there,
is it possible to get the latest firmware for my AX22? Which are the newest features included?
For a short answer I would be very thankful.
Regards,
RudiH
is it possible to get the latest firmware for my AX22? Which are the newest features included?
For a short answer I would be very thankful.
Regards,
RudiH
Hi Rudi,
No, unfortunately no response so far.
Since you are probably based out of Germany, you might want to contact Matthias Holle of Mathol at one of the VLN or the 24h races. He is the local distributor and can flash your AX22.
Unfortunately too far away for me as I am based out of the US.
Good luck!
Rob
No, unfortunately no response so far.
Since you are probably based out of Germany, you might want to contact Matthias Holle of Mathol at one of the VLN or the 24h races. He is the local distributor and can flash your AX22.
Unfortunately too far away for me as I am based out of the US.
Good luck!
Rob
firmware download:
http://www.race-technology.com/product_ ... 30545.html
Note: this link is currently on the UK side of the website, if you need to navigate back to your country specific side go back to the main page.
http://www.race-technology.com/product_ ... 30545.html
Note: this link is currently on the UK side of the website, if you need to navigate back to your country specific side go back to the main page.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
It seems like the AX22 firmware link went dead ("temporarily not available"). I had issues with the last version under this link (tilt error when setting up file and calibrating). Had to go back to a previous version I fortunately had somewhere.
Any info if the link is inactive because of the bug above? Is there a new version in the works?
I have issues with my dash3 reading.lap files (yes they have the right syntax and caps). I only get lap times with manually set markers. I was hoping to fix the issue with a firmware update.
Any tips?
Thanks!!
Any info if the link is inactive because of the bug above? Is there a new version in the works?
I have issues with my dash3 reading.lap files (yes they have the right syntax and caps). I only get lap times with manually set markers. I was hoping to fix the issue with a firmware update.
Any tips?
Thanks!!
hmm, it's been removed from the US side as well...
http://www.race-technology.com/product_ ... 30552.html
Only RT can answer as to why.
http://www.race-technology.com/product_ ... 30552.html
Only RT can answer as to why.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 8 guests