Bought used DL1 Club & Dash4Pro and need 101 to get started

racermpd
Posts: 1
Joined: Tue Sep 13, 2022 8:08 pm

Bought used DL1 Club & Dash4Pro and need 101 to get started

Postby racermpd » Tue Apr 25, 2023 8:05 pm

Hi all, so happy to now be in this community, but need help starting. I have searched around and there is a ton of info, but need the starter place. I bought a used Club & dash and need to get started. I have used many data acquistion systems before, and for some reason I feel more lost than ever. (Used: Pi in the 90's, Aim EVO back before GPS, Racepak early GPS. So yes it'e been a while, but I'm no dummy... OK maybe I am).
Is there a good 'getting started'? I know how to physically install it. How do I get it to talk to the PC to configure?
Where do I start?

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Bought used DL1 Club & Dash4Pro and need 101 to get started

Postby racetec » Wed Apr 26, 2023 9:23 am

Good morning

Please visit the online knowledge base for operating instructions and 'how to' guides:
https://www.race-technology.com/wiki/in ... are/DL1MK3
https://www.race-technology.com/wiki/in ... /DASH4PRO2

The knowledge base covers installation, operation and configuration instructions. You should be able to find all the information you require here, but if you need help with something specific and you can't find the details online you can open a support ticket with our team using the form below:
https://www.race-technology.com/gb/racing/pages/support

If you have not yet installed the Race Technology software, you can do so here:
https://www.race-technology.com/gb/raci ... e/download

I hope this helps.
BR,
Adele


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 12 guests