Dash 4 Pro - DTA T-Series - RPM Display

wil_h
Posts: 7
Joined: Wed May 04, 2016 4:41 pm

Dash 4 Pro - DTA T-Series - RPM Display

Postby wil_h » Wed Aug 24, 2022 8:20 pm

I'm trying to set up my DASH 4 Pro for my new DTA T-Series ECU (Previously using a different ECU). I've had the CAN adaptor updated (thanks RT) and I've re-configured the inputs for the new ECU. All the sensor inputs work (temperatures, pressures TPS etc.), but the RPM reading is just nonsense.

The input I'm using is RPM (Engine RPM) as listed here https://www.race-technology.com/wiki/in ... TAT-Series

It displays something, as in I get numbers displayed with the engine running, but it bares no resemblance to the actual RPM. And the value seems to slowly (over 10 seconds) rise and fall over 5 or 6 thousand RPM. Also, when you rev the engine, it has no effect. But with the engine stopped, it drops to zero. So it's getting a signal only with the engine running.

Any thoughts? ECU or DASH config?

Thanks

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Dash 4 Pro - DTA T-Series - RPM Display

Postby racetec » Thu Aug 25, 2022 9:29 am

Hello,

If you send your DASH4PRO config to support@race-technology.com we will inspect this and advise further.

Regards,
Race Technology Support


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 34 guests