Hi,
My DL1 Pro was purchased with the 6g accerometers and the 1KHz logging options. Although I configured it to collect the analog channels at 1Khz it only logged at 100Hz. When I tried to export the CSV file at 1KHz I got each 10ms reading repeated 10 times.
Is there an option in the config setup to ensure the 1KHz logging rate?
Thanks,
Jeff
DL1 Pro not logging at 1Khz only at 100Hz
-
- Posts: 8
- Joined: Fri Nov 06, 2015 6:01 pm
- Location: Vancouver Canada
Re: DL1 Pro not logging at 1Khz only at 100Hz
Hi Jeff,
There are multiple places where the sampling rate and logging rate can be configured. Please send your DL1 config to service@race-technology.com and I'll look into it.
Lorne
There are multiple places where the sampling rate and logging rate can be configured. Please send your DL1 config to service@race-technology.com and I'll look into it.
Lorne
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 16 guests