Page 1 of 1
FIRMWARE: DL1 Mk2 & Dash3Pro
Posted: Wed Jun 01, 2022 10:39 am
by the_stig_aus
Hi there
Can anyone help me with the last published firmware for the DL1 Mk2 and Dash3pro (and adaptronic ecu cable)
Im not getting any responses from RT support unfortunately and can't wait any more (weeks) as i need it in the next 48 hours.
All the links on this forum are broken
Please please please
Re: FIRMWARE: DL1 Mk2 & Dash3Pro
Posted: Wed Jun 01, 2022 12:43 pm
by DIGGIDY
I would imagine the firmware is part of the the old legacy software (v8.5), the download is at the bottom of the linked page below
https://www.race-technology.com/gb/raci ... -downloads
Information on reflashing is here
https://www.race-technology.com/wiki/in ... gerDevices
Try calling them and ask them to respond to your support case
Race Technology Tel (UK) 01773 537620
Re: FIRMWARE: DL1 Mk2 & Dash3Pro
Posted: Wed Jun 01, 2022 10:40 pm
by the_stig_aus
Thanks Diggidy - i did a search on my computer for .hex files and didnt get any hits except the displays i had created in the event the firmware was buried in the file structure some where.
My laptop is running the same/latest/last revision of the v8.5 software - however, i might download the package again and check it out incase the libraries/install files were repackaged to include the firmware - thanks for the thought path
Re: FIRMWARE: DL1 Mk2 & Dash3Pro
Posted: Thu Jun 02, 2022 1:36 am
by the_stig_aus
So after downloading the v8.5.0363 setup file - it seems only the Dash2 and DL1 sport firmwares (.hex) are included by default.
Re: FIRMWARE: DL1 Mk2 & Dash3Pro
Posted: Tue Jun 07, 2022 8:01 am
by the_stig_aus
Does anyone work @RaceTechnology anymore ? Dont even get a response when you leave a message via online chat.