Hello from Sweden, we were on the track yesterday and suddenly the dash 2 display showed no data, we had just turned of the car and when we started it it had no data at all.
The green rev light just flashed shortly and there where no display, the highbeem blue light works, the side blinkers shows . But the main display is black with no info, you can see the backlight is working. Just like it will not load any data.
One friend said to me if one sensor, for example oil pressure does not work, this can happen. Can it bee so that it will not reboot if one sensor is broken?
or what can it bee?
Best regards from sweden
Dash 2 ,no display
Re: Dash 2 ,no display
I have tried this, no result.
" Re: Dash 2 Screen Blank
Postby Tech Support (D) » Wed Jun 23, 2021 7:35 pm
Hi Mark - We can try a force reflash, do you have any buttons currently connected to the DASH2? We need to use the UP button in order to access the force reflash mode.
"
" Re: Dash 2 Screen Blank
Postby Tech Support (D) » Wed Jun 23, 2021 7:35 pm
Hi Mark - We can try a force reflash, do you have any buttons currently connected to the DASH2? We need to use the UP button in order to access the force reflash mode.
"
Re: Dash 2 ,no display
Hello Martin,
Please send a photograph of the display with the power on to support@race-technology.com
This will reach me and I will then be able to diagnose the issue and advise on next steps.
Regards,
Lorne Winborn
Please send a photograph of the display with the power on to support@race-technology.com
This will reach me and I will then be able to diagnose the issue and advise on next steps.
Regards,
Lorne Winborn
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Re: Dash 2 ,no display
Here it is, attached
- Attachments
-
- IMG_E1742 nr 2.jpg (153.62 KiB) Viewed 47276 times
Re: Dash 2 ,no display
Hello support any idea what it can be?
Can it be an sensor broken? oiltemp, pressure or waterpressure. I have heard the whole display shuts down if that happends???
Can it be an sensor broken? oiltemp, pressure or waterpressure. I have heard the whole display shuts down if that happends???
-
- Posts: 17
- Joined: Thu Jul 26, 2018 7:01 am
Re: Dash 2 ,no display
Hi - it's difficult to say without the unit in front of me. Would you be able to post the dash to us for inspection? If yes, please email daniel AT race - technology DOT com and I'll provide a returns number.
Thank you
Thank you
Re: Dash 2 ,no display
Ok I just ordered three new sensors and will put them in the car and try one time. Last owner of the car said that this happend 2 years ago and shifted the oilpressure sensor and all came back.
is the dash programmed not to boot up if one sensor is broken?
is the dash programmed not to boot up if one sensor is broken?
Re: Dash 2 ,no display
Surely 1 faulty sensor won't do this ?
Re: Dash 2 ,no display
Ot did for last owner, a new oilpressurecontact and it worked again. We have sortded out now that when we put in the cables without sensor it stopped working, have sent cables and dash to race technology.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 44 guests