Oil pressure constantly on 5.0 on Dash2Pro
Posted: Mon Jul 05, 2021 1:01 pm
Hi all
I have a question regarding a problem with the oil pressure on my Dash2Pro.
I have a Renault Clio 3RS and using the Dash2Pro with a Ecu Master EMU Black. Unfortunately it shows constantly a 5.0 oil pressure, also when the engine is warm. It does not change at all. As soon as you start the ignition it jumps from 0 to 5. Oil temperature and water temperature works fine.
Any idea what this behaviour could be? I've flashed the firmware, no change. Any other ideas?
Thanks a lot!
I have a question regarding a problem with the oil pressure on my Dash2Pro.
I have a Renault Clio 3RS and using the Dash2Pro with a Ecu Master EMU Black. Unfortunately it shows constantly a 5.0 oil pressure, also when the engine is warm. It does not change at all. As soon as you start the ignition it jumps from 0 to 5. Oil temperature and water temperature works fine.
Any idea what this behaviour could be? I've flashed the firmware, no change. Any other ideas?
Thanks a lot!