Hi all
I have a question regarding a problem with the oil pressure on my Dash2Pro.
I have a Renault Clio 3RS and using the Dash2Pro with a Ecu Master EMU Black. Unfortunately it shows constantly a 5.0 oil pressure, also when the engine is warm. It does not change at all. As soon as you start the ignition it jumps from 0 to 5. Oil temperature and water temperature works fine.
Any idea what this behaviour could be? I've flashed the firmware, no change. Any other ideas?
Thanks a lot!
Oil pressure constantly on 5.0 on Dash2Pro
-
- Posts: 2
- Joined: Sun Jul 04, 2021 3:24 pm
Re: Oil pressure constantly on 5.0 on Dash2Pro
Where is the sensor data coming from - oil pressure sensor or ECU?
Is it definitely a sensor and not a switch?
Is it definitely a sensor and not a switch?
-
- Posts: 2
- Joined: Sun Jul 04, 2021 3:24 pm
Re: Oil pressure constantly on 5.0 on Dash2Pro
It's an oil pressure sensor which is directly connected to the Dash2Pro.
Re: Oil pressure constantly on 5.0 on Dash2Pro
I'd be checking the wiring and pull up resistor. It sounds as though it's reporting the 5V reference wire.
Return to “General support questions”
Who is online
Users browsing this forum: Bing [Bot] and 16 guests