DL1 CLUB power on issue
Posted: Tue Jul 14, 2020 10:19 am
Hi,
Got a DL1 CLUB which has recently been working. Now when power is applied the unit does not work. Initially I get both red & both green LEDs flashing very quickly. Pushing in the SD card makes these go out (SD card is blank has been reformatted) but the power on LED never comes on.
There is nothing plugged into the rear of the unit other than the connector block (plugging in the GPS makes no difference). When connecting the DL1 via USB to my PC it does register (standard windows notification sound) and the device manager shows a new USB serial port. Trying to read the configuration just fails with a 'No response for hardware identification message'.
Any idea what the problem could be?
Got a DL1 CLUB which has recently been working. Now when power is applied the unit does not work. Initially I get both red & both green LEDs flashing very quickly. Pushing in the SD card makes these go out (SD card is blank has been reformatted) but the power on LED never comes on.
There is nothing plugged into the rear of the unit other than the connector block (plugging in the GPS makes no difference). When connecting the DL1 via USB to my PC it does register (standard windows notification sound) and the device manager shows a new USB serial port. Trying to read the configuration just fails with a 'No response for hardware identification message'.
Any idea what the problem could be?