No log files crearted
Posted: Thu Jul 11, 2019 11:10 pm
Hi all,
I'm having problems with my logger; it is a DL Mk2. I bought my bike with the logger and dash already set-up and I hadn't been using the logging feature. I did try the last few race days to start using the logger, I know it had recorded the data previously because when i formatted the CF card to start fresh it had data files showing my local track; i bought the bike interstate.
However, it will now not create any data files now, this started around the time the fuse to the logger partially blew and the power to the logger was erratic (logger turning on and off while riding) it no longer records the data. The fuse is replaced now and it is constantly powered.
The logger is set-up to start automatically and I have been pressing the trigger button to set the finish line because I haven't got a map file set-up yet.
I'm thinking of buying a new CF card to try that has a last attempt but the cards used worked for the previous owner and it did have data from my racing here on it before.
Is there anything else I can do or does the logger need to be replaced?
I haven't managed to connect to the logger with my laptop, windows 10 and usb to serial issues. But when following the manual to connect I got to the stage to check the firmware and it does have the out dated firmware that requires the legacy program. Has anyone fixed logger issues updating the firmware? I will need to manage to connect to do this though so I don't lose the set-up calc's of the Dash.
Thanks,
Daniel
I'm having problems with my logger; it is a DL Mk2. I bought my bike with the logger and dash already set-up and I hadn't been using the logging feature. I did try the last few race days to start using the logger, I know it had recorded the data previously because when i formatted the CF card to start fresh it had data files showing my local track; i bought the bike interstate.
However, it will now not create any data files now, this started around the time the fuse to the logger partially blew and the power to the logger was erratic (logger turning on and off while riding) it no longer records the data. The fuse is replaced now and it is constantly powered.
The logger is set-up to start automatically and I have been pressing the trigger button to set the finish line because I haven't got a map file set-up yet.
I'm thinking of buying a new CF card to try that has a last attempt but the cards used worked for the previous owner and it did have data from my racing here on it before.
Is there anything else I can do or does the logger need to be replaced?
I haven't managed to connect to the logger with my laptop, windows 10 and usb to serial issues. But when following the manual to connect I got to the stage to check the firmware and it does have the out dated firmware that requires the legacy program. Has anyone fixed logger issues updating the firmware? I will need to manage to connect to do this though so I don't lose the set-up calc's of the Dash.
Thanks,
Daniel