I have a slight problem with my dash 2.
All of a sudden it is not showing battery voltage. it has been set up for some time and the data is transfered from my DL1 MK1 (analouge . I have tried switching it to another screen, and that does not work.
it just comes up with the word T
Any ideas
Battery voltage issue
Hi there,
first of all, are there any other sensors connected to the DL1 that you can still see are working correctly on the dash screen?
If so, please send you dash configuration file to sam@race-technology.com, and I will look into this a little further.
If you could also confirm that the DL1 is still recording a correct value on analogue 8 by logging a short file and sending that over with the configuration, that would be most helpful.
Kind Regards,
RT Support (SK)
first of all, are there any other sensors connected to the DL1 that you can still see are working correctly on the dash screen?
If so, please send you dash configuration file to sam@race-technology.com, and I will look into this a little further.
If you could also confirm that the DL1 is still recording a correct value on analogue 8 by logging a short file and sending that over with the configuration, that would be most helpful.
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Sam, i can report that all other sensors connected to the DL1 (it is the MK1 version) are displaying correctly on the dash.
I can also confirm that the DL1 is recording aux 8 correctly as i started the car up in the garage and created a run file (which i have since deleted).
I am having trouble with my email from home so will mail over the dash config from work at some stage tomorrow
I can also confirm that the DL1 is recording aux 8 correctly as i started the car up in the garage and created a run file (which i have since deleted).
I am having trouble with my email from home so will mail over the dash config from work at some stage tomorrow
Re: Battery voltage issue
The manufacturers tell you that you should use only the same brand batteries together, but they don't provide any good justification for that. Whether alkalines or rechargeable, voltage is voltage, and your device neither knows nor cares who made the batteries. Your device is certainly not going to tattle on you to the manufacturers. Now, if your alkalines had very different capacities then that could promote leaking, but the difference between most alkalines isn't that great, and you shouldn't really be using alkalines for most purposes anyway. For rechargeable batteries, again, just try to match the capacities as close as possible here, not to prevent leaking (since rechargeables almost never leak), but to avoid reducing the cycle life of the lower-capacity battery.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 288 guests