Page 1 of 1
Dash2 error
Posted: Wed Sep 23, 2009 5:14 pm
by hellas
My Dash2 stopped working after a reflash.
Now i can't reflash it eihter by DL1 or Com1. Is there any way of reset the Dash2 or push up new firmware?
/Pär
Posted: Tue Sep 29, 2009 10:42 am
by Support
Try pressing and holding the ‘UP’ button as the unit is turned on, when the fog light comes on release the up button then try to re-flash from the DL1 or PC.
Posted: Tue Sep 29, 2009 11:10 am
by hellas
Support wrote:Try pressing and holding the ‘UP’ button as the unit is turned on, when the fog light comes on release the up button then try to re-flash from the DL1 or PC.
Hi,
the trick with pressing up button to reflash works out well, but when i use the version "DASH2 customer reflash 9 1 9 090907" available on your site the Dash wont work, but when i use an old version "DASH2 customer reflash 9 2 0 071122" the dash starts working.
I think i have from your point of view an quit old dash from 2006. Do you think it might be an compability problem?
Please send me the latest working firmware.
Regards
Pär
Posted: Wed Oct 07, 2009 10:52 am
by Support
We have another DASH2 which is showing the same issue on it’s way back to us for testing now. Until this is fixed you will need to stick with the firmware you have which works.
Posted: Sun Nov 22, 2009 2:20 am
by cr_craig
I've got this problem with the 9 1 9 090907 release as well. Where can I get the previous version? I stupidly deleted it from my computer.
Posted: Sun Nov 22, 2009 9:12 am
by Adam37tr
I had this problem , its a wire shorting on the back of the dash cover
Sent back to Race-tech and they sorted it
Posted: Sun Jun 27, 2010 2:05 pm
by Adam37tr
I have the problem again
Tried reflash new software and get above pic on dash2
Now it wont reflash or do f all
Another trip to Notts , hope they can sort it for next weekend as at pod
Posted: Mon Jun 28, 2010 8:51 pm
by Adam37tr
All sorted thanks to Race-tech
Posted: Sun Jul 11, 2010 4:43 pm
by Peter Carroll/Toronto
I'be has this problem recently with several units. The first time I reflash it messes up the unit. However, the second time I reflash it works perfectly. I am told it is virtually impossible to mess up the Dash2 with a reflash. So I keep trying and eventually it works.
I suspect is might be to do with USB Serial converters...
Posted: Wed Jul 28, 2010 10:45 pm
by hancheyb
So what is the process to get an older firmware? I just did the same thing with this newer file and I'm locked up now.
Thanks,
Brian
Posted: Thu Jul 29, 2010 9:08 am
by Support
If you need an older firmware for the DASH2 just send me an email gummi(at)race-tech....com and I'll send you one back.