Identifying DL1 Firmware version and reflashing issues...
Posted: Mon Mar 27, 2006 9:53 pm
I am trying to use a DASH1 with a DL1, but am unable to have the DASH1 update its configuration by loading a Dash.dat file on the CF card.
I am suspecting the DL1 firmware, but would like to be sure. My understanding is the DL1 firmware must be updated to v6 to work properly with the DASH1. Is this correct?
How do you determine what firmware version a DL1 has? Can it be extracted from Monitor or other s/w?
I tried using the reflash tool, but the tool responds with a communication problem, stating the DL1 is not connected (may be the laptop I am using). This laptop works fine in Monitor mode, as well as with other RS-232 serial based tools (DATAQ, ETAS, etc.). Is there a timing issue or other 'technique' that is recommended?
I am suspecting the DL1 firmware, but would like to be sure. My understanding is the DL1 firmware must be updated to v6 to work properly with the DASH1. Is this correct?
How do you determine what firmware version a DL1 has? Can it be extracted from Monitor or other s/w?
I tried using the reflash tool, but the tool responds with a communication problem, stating the DL1 is not connected (may be the laptop I am using). This laptop works fine in Monitor mode, as well as with other RS-232 serial based tools (DATAQ, ETAS, etc.). Is there a timing issue or other 'technique' that is recommended?