Wanted - Configuration file DASH3

Post Reply
HansB
Posts: 11
Joined: Thu Jun 12, 2008 9:40 pm

Wanted - Configuration file DASH3

Postby HansB » Tue Apr 21, 2009 6:41 am

Could anybody send me the default config file (.DH3) from a DASH 3, as described in the manual and provided in the unit?

I want to make some adjustments, and do not have the cable to read back the existing configuration. The one supplied with the RT 7010 version SW is different.
Top
jlucas
Posts: 302
Joined: Tue Nov 29, 2005 12:45 am
Location: East Liberty, OH
Contact:
Contact jlucas

Postby jlucas » Wed Apr 22, 2009 12:42 am

Is there a problem with the one in the latest software version?

email sent
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Top
shasselg
Posts: 22
Joined: Wed Feb 14, 2007 6:56 pm
Location: Sweden

Postby shasselg » Fri Apr 24, 2009 8:25 pm

I would also like the original Dash 3 setup. The original DASH.HEX file does not seem to be supplied.
Top
jlucas
Posts: 302
Joined: Tue Nov 29, 2005 12:45 am
Location: East Liberty, OH
Contact:
Contact jlucas

Postby jlucas » Sat Apr 25, 2009 12:19 am

I checked for Hans and I do not have it. He got it via email from RT.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Top
shasselg
Posts: 22
Joined: Wed Feb 14, 2007 6:56 pm
Location: Sweden

Postby shasselg » Sat Apr 25, 2009 3:17 am

jlucas wrote:I checked for Hans and I do not have it. He got it via email from RT.


Thanks. I will check with them. It would be good to have a place at the forum where such files could be kept I think and easily downloaded by any user....
Top
shasselg
Posts: 22
Joined: Wed Feb 14, 2007 6:56 pm
Location: Sweden

Postby shasselg » Thu Apr 30, 2009 4:18 pm

I have now got it sent to me by the support team, apparently it has never been part of the installation CD but will be added in the future.
Top
Post Reply

Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 283 guests