Race Technology

Hi All, I've got my dash in and working apart from it's not recording my miles or showing gear indicator. I've done a bit of reading and am confused as to why it's not working, Speed/RPM/temps/pressure/levels are all working correctly it's just not logging my miles.
I've seen a thread regarding setting mph/kph on the edit screen on the dash and mine is already set to mph, when I go into settings on the laptop everything looks ok and can't see anything obvious (this is my first digital dash though)

Speed is taken using my original E30 diff pickup, the speed corrosponds to GPS on my phone, rpm is taken directly from my ecu and is set to 3 pulses per revolution which seems corect as idle is just below 800rpm, the engine is a BMW M62B44 V8. Am I way off with this part?

Any help woud be appreciated as I want to get the car put through it's mot.

Cheers

Charlie

Hi Charlie - What version of firmware is your DASH2 unit running on? To find out, press and hold the DOWN button while the dash is powering up. Keep the button held until you see the firmware version number appear along the bottom of the display.

Best regards,
Support

Hi, thanks for the reply, it's running 10.0.19

Any advice would be welcome, car is booked in for an MOT on monday and would like to get the odometer working for it.

Thanks

Charlie

hi iam having the same issue with the odometer its running 10.0.19