Page 1 of 1
How to show min/max value in a sector, Dash4Pro
Posted: Fri Nov 16, 2018 9:33 am
by HH Tech
Hi
How do you show max EGT in a specific sector on th Dash 4 Pro with DL1 Club?
I guess I will have to enter my EGT/Thermocouple amplifier formula in the Dash4 as well as in the DL1 Club?
IE Max EGT at longest straight on gokart track
/Henrik
Re: How to show min/max value in a sector, Dash4Pro
Posted: Wed Dec 12, 2018 7:41 pm
by HH Tech
Hi again,
I'm having problem with displaying max / min value of RPM / EGT on the Dash 4
EGT and RPM show OK on display
I have the following channels as "user defined variables" in the Dash 4
EGT = VAR_6007 (((2,21 * (VAR_0200 ^ 3)) - (15,43 * (VAR_0200 ^ 2))) + (273,61 * VAR_0200)) - 102,05
EGT MAX Max(VAR_6007)
EGT MIN Min(VAR_6007)
RPM Max Max(VAR_0010)
RPM Min Max(VAR_0010)
Re: How to show min/max value in a sector, Dash4Pro
Posted: Thu Dec 13, 2018 10:08 am
by Support
Hello,
Using min/max in a formula allow you to see the min or max or a set of variables. For example...
MAX(EGT1,EGT2,EGT3,EGT4) will display the hottest of the 4 EGT's.
On the DASH4 it is possible to do it by using x in a user defined variable as the previous value. For example...
If(EGT1>x,EGT1,x) If EGT1 is more then previous value output EGT1 else output previous value.
Copy and paste this for RPM
if(VAR_0010>x,VAR_0010,x)
Kind regards,
Support (K)
Re: How to show min/max value in a sector, Dash4Pro
Posted: Fri Dec 14, 2018 8:10 am
by HH Tech
Thank you!
/Henrik
Re: How to show min/max value in a sector, Dash4Pro
Posted: Tue Jan 08, 2019 6:01 pm
by HH Tech
I'm finally home and X-mas is over so I sat down to update my DASH4 configuration.
There must be something that i don't understand about adding the formula to the "user defined variable" to get a "tell tale" RPM value.
VAR_0010 is RPM
- Clipboard01.jpg (63.24 KiB) Viewed 14454 times
Surely the "x" have to be replaced? so replaced it with "100"
- Clipboard02.jpg (63.22 KiB) Viewed 14454 times
and just the basics
- Clipboard03.jpg (63.42 KiB) Viewed 14454 times
Re: How to show min/max value in a sector, Dash4Pro
Posted: Sun Sep 01, 2019 7:53 am
by Maxx
Hi HH, did you ever sort this. Was just 'hawking around' the forum and spotted it so tried myself. Nothing wrong with the equation that I can see, worked for me. May just be a rogue invisible character, this is a copy paste straight from my test.
if(VAR_0010>x,VAR_0010,x)
Maxx