Dash 2 set up problems
Posted: Fri Oct 13, 2017 9:36 am
Hi
I have wired up my dash 2 and the 4 momentary buttons. the unit powers up and the display is working fine , how ever when I scroll the the menus
the following is all I get , 1 Edit buttons , 2 speed unit , 3 lap times , 4 LED brightness.then it goes back to edit buttons .
I have connected my laptop using a USB to rs232 adapter using the version 8.5 software . after I configer the screen and try send config file the screen will not update
any help would be great .
regards
Justin.
I have wired up my dash 2 and the 4 momentary buttons. the unit powers up and the display is working fine , how ever when I scroll the the menus
the following is all I get , 1 Edit buttons , 2 speed unit , 3 lap times , 4 LED brightness.then it goes back to edit buttons .
I have connected my laptop using a USB to rs232 adapter using the version 8.5 software . after I configer the screen and try send config file the screen will not update
any help would be great .
regards
Justin.