Hi,
I am fairly new to Race Technology systems. I have a dl1 mk3 with a dash 4 pro set up in my car. I have done a bit of searching but cant find what I am looking for. Is there any way to smooth or filter the G-Force channels on the x/y graphs? What I get at the moment is very spikey and its hard to get useful information from it.
Any help appreciated.
Oli
G-Force Filtering.
-
- Posts: 3
- Joined: Tue Jun 11, 2013 5:47 am
- Location: Wellington, NZ
- Contact:
A nice easy one to start the morning off with )
If you go to the variable tree on the right of the configuration software and go to the variable you are interested in (in this case long and lat g force) and set the smoothing to something. For a nice smooth update on a bargraph I would suggest something in the range of about 0.2 to 0.3 seconds.
Support - Andy
If you go to the variable tree on the right of the configuration software and go to the variable you are interested in (in this case long and lat g force) and set the smoothing to something. For a nice smooth update on a bargraph I would suggest something in the range of about 0.2 to 0.3 seconds.
Support - Andy
-
- Posts: 3
- Joined: Tue Jun 11, 2013 5:47 am
- Location: Wellington, NZ
- Contact:
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 209 guests