Re-zero distance on Dash 3

Post Reply
Colin105
Posts: 33
Joined: Mon Jan 28, 2013 4:56 am
Location: Australia

Re-zero distance on Dash 3

Postby Colin105 » Mon Feb 04, 2013 3:43 am

Just purchased a DL1 and Dash 3 for my tarmac rally car. Just thinking about what I want to display on the Dash and wondering if there is any way to have a Distance count-up that is re-settable back to zero with a button. A button on the dash would be ideal, but external input to the logger would be ok, maybe the unused lap beacon input?
You only need 2 things in your tool box, duct tape and WD40.
-if it moves and it shouldn't use the duct tape
-if it doesn't move and it should use the WD40
Top
osborni
Posts: 497
Joined: Fri Dec 07, 2007 9:08 pm
Location: USA, Michigan

Postby osborni » Mon Feb 04, 2013 1:21 pm

DL1 Mk1, 2 or 3?

The Dash2 has a trip odometer that is re-settable.

I do not own a Dash3, but you can assign "Distance" to a variable. I do not know if that can be reset to zero.

You do not have a purpose built rally TSD computer?
BMW 2000 M Coupe
Top
Support

Support

Postby Support » Mon Feb 04, 2013 3:13 pm

Sorry the DL1 doesn't output distance and the DASH3 doesn't calculate it.

This feature is only available on the DASH2.

Kind regards,
Kieran
Top
Colin105
Posts: 33
Joined: Mon Jan 28, 2013 4:56 am
Location: Australia

Postby Colin105 » Mon Feb 04, 2013 10:47 pm

You only need 2 things in your tool box, duct tape and WD40.
-if it moves and it shouldn't use the duct tape
-if it doesn't move and it should use the WD40
Top
Support

Support

Postby Support » Thu Feb 07, 2013 11:49 am

Correct. The DASH3 can display any message being sent to it. If you select a message that isn't being sent to it then it will just display 0.

Regards,
Support (K)
Top
Post Reply

Return to “General software support”

Who is online

Users browsing this forum: No registered users and 219 guests