I have to dynamic lines.
The green one has endY- endXmultiplier 0.1,
the red one 100.
The result is the same? Somehow my mistake or a bug?
further explanation: The lines should be a "g-circle", here they show primarily the longitudinal acceleration. I want the line braking downwards und speeding up upwards (against the usual). So in fact green has a endYmultiplier -0.1 (minus).
video-overlay dynamic line
Yes I understand that, what I don't understand is:
that the line don't bother about
- the sign plus/minus
- the value of the multiplier
The result is always the same as showed above, no change of direction in dependence of plus/minus, no change of the length of the line in dependence of the multiplier.
And I have controlled, if Analysis takes the canged vgl-File about pushing around the dash-bmp - its position changed in the exported video but not the lines.
that the line don't bother about
- the sign plus/minus
- the value of the multiplier
The result is always the same as showed above, no change of direction in dependence of plus/minus, no change of the length of the line in dependence of the multiplier.
And I have controlled, if Analysis takes the canged vgl-File about pushing around the dash-bmp - its position changed in the exported video but not the lines.
ml,
I'm not 100% sure what you are asking but are you looking to reverse the direction of the line movement?
i.e. rather than the lateral G line moving to the right when you turn right you want the line to go LEFT (i.e. the direction of the g-force)?
I do this on this video : http://www.youtube.com/watch?v=mu1uZgpDvkg
What I do is, in Variable Manager IN THE ANALYSIS program I edit the lat accel->Unit to be a calculated value x*(-1) which has the effect of reversing the direction of the display g-force (I also do this for long accel)
Maxx
I'm not 100% sure what you are asking but are you looking to reverse the direction of the line movement?
i.e. rather than the lateral G line moving to the right when you turn right you want the line to go LEFT (i.e. the direction of the g-force)?
I do this on this video : http://www.youtube.com/watch?v=mu1uZgpDvkg
What I do is, in Variable Manager IN THE ANALYSIS program I edit the lat accel->Unit to be a calculated value x*(-1) which has the effect of reversing the direction of the display g-force (I also do this for long accel)
Maxx
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 217 guests