Dash2 on Link G4+ CAN

Posts: 1
Joined: Sat Jan 26, 2019 8:20 pm

Dash2 on Link G4+ CAN

Postby jj205mi » Sun Oct 11, 2020 4:52 pm

I have a Dash2 currently installed in my car and just got myself a Link G4+ ecu, i would like to hook the link to the dash using the CAN and run the sensors from there rather than the analogue ones i have currently fitted to the dash.

i see there was a can interface which used to be listed in the help section, but doesn't have any detail in there now.

is the interface still available and link specific, which parts do i need to buy to make this happen?

Thank you, John

Site Admin
Posts: 302
Joined: Thu Oct 27, 2005 12:02 pm

Re: Dash2 on Link G4+ CAN

Postby racetec » Mon Oct 12, 2020 8:48 am

Hi John

We do still supply the CAN interface for the Link G4+. It can be purchased here:
https://www.race-technology.com/gb/raci ... interfaces

Further details, including a list of available channels, can be found here:
https://www.race-technology.com/wiki/in ... LINKG4XCAN

Support (AH)

Return to “Pre-sales product questions”

Who is online

Users browsing this forum: No registered users and 1 guest