Search found 26 matches

by mebilloz
Tue Aug 07, 2012 4:23 am
Forum: How do I...
Topic: Offsetting Data Sets for alignment needs
Replies: 3
Views: 6303

Thanks for the reply, but its not the track map but the data set I need to shift. I have just played with the method you mention which has offset the track map itself but not the data. http://members.dodo.com.au/~wm1145/RT_overlays.pdf If the image works, you can see the difference between the red a...
by mebilloz
Mon Aug 06, 2012 1:01 am
Forum: How do I...
Topic: Offsetting Data Sets for alignment needs
Replies: 3
Views: 6303

Offsetting Data Sets for alignment needs

Hi All I have looked but cannot seem to find the answer. I have some data from the weekend from a local hillclimb. Trouble is there is an offset in the quick graphs between the two data sets. I assume that the default plots are agains distance, from where, or is this GPS poisition?? Irresepective, I...
by mebilloz
Sat Sep 24, 2011 4:03 am
Forum: General support questions
Topic: DASH2 data not captured on DL1 ?
Replies: 4
Views: 4815

Tried reseating all the plugs with no luck. Still no data from the DASH2 to the DL1 :( ECU Serial data yes, DASH2 Analouge data -No.

Bill
by mebilloz
Sat Sep 24, 2011 3:16 am
Forum: General support questions
Topic: DASH2 data not captured on DL1 ?
Replies: 4
Views: 4815

Hi

It is all RT stuff, and hooked up as per their diagrams. I will check the seating of the 2 9 pin plugs to make sure they are fully seated and hope that that is the problem.

Ta

Bill
by mebilloz
Fri Sep 23, 2011 10:35 am
Forum: General support questions
Topic: DASH2 data not captured on DL1 ?
Replies: 4
Views: 4815

DASH2 data not captured on DL1 ?

Hi I have a DASH2, DL1, + ECU interface set up. The DL1 captures the data from the ECU fine, and the DASH2 displays the ECU data fine. What doesnt seem to work, is the DL1 capturing the DASH2 anolouge inputs. I have these connected to capture fuel level, water temp etc but in 'Analysis' it indicates...
by mebilloz
Mon Jul 11, 2011 11:34 am
Forum: General support questions
Topic: dash 2 shift lights and data log error
Replies: 1
Views: 2918

dash 2 shift lights and data log error

Hi All I have just run my DL1/Dash2 combo in anger for the first time. In reviewing the data I noticed that the max RPM in the data log was just under 7000rpm. Yet I was shifting when all the shift lights came on which should have been at 7600rpm. The Dash is feed the Rpm from the ECU on a dedicated...
by mebilloz
Tue Jun 14, 2011 4:28 am
Forum: How do I...
Topic: Serial data to DL1 - where does the data go?
Replies: 5
Views: 7790

Found a plug issue which I have replaced and I think resolved the issue.

Cheers

Bill
by mebilloz
Wed Jun 08, 2011 4:05 am
Forum: How do I...
Topic: Serial data to DL1 - where does the data go?
Replies: 5
Views: 7790

Hi Osborni

The decode box is ticked. Just had a look with the monitor tool and all channels from the ECU are static. I either have an ECU issue or an ECU adaptor issue.
Starting to look into these now.

Cheers

Bill
by mebilloz
Tue Jun 07, 2011 11:01 pm
Forum: How do I...
Topic: Serial data to DL1 - where does the data go?
Replies: 5
Views: 7790

Thanks, Now just need to find out why thay are all 0...


Bill
by mebilloz
Tue Jun 07, 2011 9:21 am
Forum: How do I...
Topic: Serial data to DL1 - where does the data go?
Replies: 5
Views: 7790

Serial data to DL1 - where does the data go?

Hi All This will probably be a 'nubie' question (which I am). I have just installed a DL1, DASH2, Serial interface package and am trying to get something to work. I have disabled all direct inputs to the DL1 (as they are not connected). I have enabled GPS + accelerometers + serial feed. If I press t...
by mebilloz
Tue Mar 22, 2011 11:31 pm
Forum: Pre-sales product questions
Topic: DL1 against DL1 Mk3
Replies: 9
Views: 13371

DL1 against DL1 Mk3

Hi All I am close to buying a DL1 or a DL1 Mk3. From what I can see the Mk3, functionality wise, is identical to the standard DL1. Yes it has a USB port but at an extra 100 pounds it seems an expensive add on. I realise that it has a completly different CPU etc but I am unsure that for a weekend hob...

Go to advanced search