You need a voltage divider circuit. Google it if your not familiar. You definitely need a regulated voltage source, if you use the built in one keep in mind the limited current capacity or you can use a stand alone one (ex. Radio Shack 7805). Car 12v fluctuates and would render your data useless. Yo...

DASH3 full, I assume?

Correct, the DASH is always in a "receive" mode.

If your asking what my email is it's: info at fasttechlimited.com If your asking how to send attachments via email, I suggest you ask someone that can show you on your computer as it's not practical for me to explain it. As you make config changes you should be saving a copy to your hard drive for r...

Those are DL1 settings, not DASH settings like you asked about.

My guess is most DL1s are purchased without displays, hence the default setup.

If you like, send me your DL1 config & DASH3 config files as well as one of your DL1 run files and I'll take a look at it.

It is configured just fine from the factory. Screen changes or RPM pulse/shiftlights will of course require unique settings.

Is your CF card formatted in FAT?

How/When are you starting logging?
You must have GPS lock before starting when using .lap files which is why starting based on GPS speed is a great idea.

I've seen them cause issues.
Don't call me if you keep them on there.

Delete them. It's stored in the hardware.

There is stuff in the works to be able to log more meaningful shock velocities. However I have no control over it so I can't say anything about the timing of it. Jeremy, Is there an ETA on the increased sampling rates for damper linear pots? Also, will this be a hardware or software upgrade? David ...

Firmware? or software? Isn't the drop downs in the config software?

Perhaps you should call the dealer you bought your equipment from and he can walk you through it over the phone.

You should only have a setup.bin on the CF card when you are making a change, it should not stay on there permanently. For your current situation, remove or overwrite the current setup.bin, follow the instructions to get it onto your DL1, and then remove the setup.bin from your CF card. TIP: store a...

No you don't have to do it again, it's just a reminder for people.

Just make sure you save it at the root level (ie. not in a folder).