Search found 7 matches

by Samueljon
Tue Apr 19, 2022 5:47 am
Forum: General software support
Topic: Fuel level display
Replies: 3
Views: 8901

Re: Fuel level display

Morning,

I’m using the standard Nissan 200sx fuel sender with a Haltech signal conditioner

I filled the last 20 litres straight out the Jerry can rather than decanting it into a 5L can

Cheers
Sam
by Samueljon
Mon Apr 18, 2022 5:23 pm
Forum: General software support
Topic: Fuel level display
Replies: 3
Views: 8901

Fuel level display

Evening all,

I finally got round to sorting the fuel level reading on my dash2

The dash seems to read roughly right but I’ve added an extra 20 litres and the dash doesn’t seem to show it? Do I have to do the whole table up to a full tank?

Cheers for your help

Sam
by Samueljon
Mon Jan 18, 2021 10:07 am
Forum: Installation questions
Topic: Dash2 charge light
Replies: 1
Views: 24269

Dash2 charge light

Morning, I’ve recently installed a dash2 into my Nissan s14, even though the alternator is chucking out 14/15v the light seems to stay on. After having a search on here it looks like someone said about running a 5ohms 24v resistor I fitted that and the light has remained on, best move is to just kee...
by Samueljon
Sat Jan 09, 2021 3:44 pm
Forum: General software support
Topic: can adapter with analog
Replies: 1
Views: 9792

can adapter with analog

afternoon

im just wondering if im able to run an analog sensor along side the CAN set up im currently running.

ideally I just want to run an oil pressure sensor straight to the dash rather than through the ecu but i still want to use the CAN set up to use the tacho/water temp
by Samueljon
Tue Sep 01, 2020 9:20 am
Forum: General software support
Topic: Vrs conditioner
Replies: 1
Views: 9840

Vrs conditioner

Morning, I’ve recently installed a vrs conditioner to my standard rb25 speed sensor, before fitting it to the gearbox I ran the sensor on a drill and seemed to get a speed, since fitting it to the box and driving the car the speed doesn’t relate to how fast the car is actually moving Any help I’d be...
by Samueljon
Mon Jul 06, 2020 2:06 pm
Forum: General software support
Topic: Battery light staying on
Replies: 2
Views: 10119

Re: Battery light staying on

Afternoon dan,

Yeah it’s all wired up correctly but the charge light stays alight even while the car is running.

It’s the same issue this guy was having in the link below -

viewtopic.php?t=2848
by Samueljon
Mon Jul 06, 2020 9:07 am
Forum: General software support
Topic: Battery light staying on
Replies: 2
Views: 10119

Battery light staying on

Hi, Recently installed my dash 2 into my 200sx, the standard set up has 1 wire coming from the alternator to the dash, I’ve tried to have a search but couldn’t find a proper answer. Does the dash2 need a resistor from the alternator before the dash? If so I don’t suppose anybody knows what size? Tha...

Go to advanced search