Search found 4 matches
- Sun Sep 30, 2018 7:00 am
- Forum: General software support
- Topic: system fail to communicate send configuration ERROR
- Replies: 1
- Views: 11075
system fail to communicate send configuration ERROR
help i have a DL1 connected to Dash2 with ECU loom, and up until now i have been able to program and change configuration using my PC with usb lead to the front of the DL1 and to the Dash 2 using latest race tech software. So today i have an error SYSTEM FAIL TO COMMUNICATE SEND CONFIGURATION when i...
- Wed Sep 12, 2018 11:21 pm
- Forum: General support questions
- Topic: Live Monitor showing incorrect analogue voltage readings
- Replies: 1
- Views: 8546
Live Monitor showing incorrect analogue voltage readings
I have some very strange readings on the LIVE MONITOR software for the incoming sensors. Readouts of temps/pressures are displaying as I’d expect on the DASH2 but I wanteded to fine calibrate the sensors and get some voltage readings vs temps but crazy values shown on the Monitor software. I’ve chec...
- Mon Sep 10, 2018 10:09 am
- Forum: General support questions
- Topic: DL1 running 2 x displays ?
- Replies: 1
- Views: 7997
DL1 running 2 x displays ?
hi all, i was wondering about the DL1 logger being about to output display data to a Dash2 display (navi side) and a Dash4 on the driver side. I was going to power the Dash4 'power' from the vehicle rather than draw more current from the DL1 unit to power the 2nd display, but wondering if anyone has...
- Mon Aug 06, 2018 9:07 am
- Forum: General support questions
- Topic: Dl1 Club all LED's FLASHING FAST
- Replies: 1
- Views: 7373
Dl1 Club all LED's FLASHING FAST
Hi, hopefully someone may have an idea on this or a fix up :-) Having all sorts of trouble with DL1 club unit today. I’m using the latest 8.5 config software and Dash2 is connected to rear port of DL1 club logger and USB to PC USB. So after entering in some settings and screen setups for the Dash2 t...