Hello Slimat,
Not possible to access DASH2 PRO menu whilst vehicle in motion, done to promote safe driving. Button functions can be changed in the DASH2 PRO configuration utility in User Control Inputs. For example, change Set / Select button function to Add Marker.
Search found 17 matches
- Wed Sep 28, 2022 4:48 pm
- Forum: General support questions
- Topic: Dash 2 Pro - menu button; "vehicle is moving"
- Replies: 1
- Views: 23968
- Wed Sep 28, 2022 3:05 pm
- Forum: General software support
- Topic: Dash2 Pro Oil Pressure Warning / battery voltage
- Replies: 3
- Views: 13920
Re: Dash2 Pro Oil Pressure Warning / battery voltage
Hello,
Please send a copy of your DASH2 PRO configuration file to the following address, I will investigate the alarm issue, check on the oil pressure reading in PSI and setup battery voltage.
daniel AT race - technology DOT com
Please send a copy of your DASH2 PRO configuration file to the following address, I will investigate the alarm issue, check on the oil pressure reading in PSI and setup battery voltage.
daniel AT race - technology DOT com
- Tue Mar 08, 2022 10:48 am
- Forum: General software support
- Topic: Dash4pro stopwatch/timer function
- Replies: 4
- Views: 14510
Re: Dash4pro stopwatch/timer function
Thanks for the info, the data logger will need to be logging in order to record lap timing information. So you will still need a switch (latching switch) connected to the DL1 PRO in order for the units to identify when the pit lane has been entered & exited. Send a copy of your DL1 PRO & DASH4PRO un...
- Fri Feb 18, 2022 11:01 am
- Forum: General software support
- Topic: Dash4pro stopwatch/timer function
- Replies: 4
- Views: 14510
Re: Dash4pro stopwatch/timer function
You need to pair the DASH4PRO with one of our data loggers for timed equation functionality, do you have one (if yes, which model)?
- Mon Nov 29, 2021 1:22 pm
- Forum: General software support
- Topic: dash2 revs not reading correctly
- Replies: 5
- Views: 18109
Re: dash2 revs not reading correctly
Thanks for the car info, I'm not sure why the RPM from the OBDII port is reading as it is. However the best thing to do is take the RPM from a fuel injector instead. The data transmit over the OBDII port is very slow, it's not fast enough for RPM. Taking the signal from a fuel injector will give you...
- Wed Nov 24, 2021 6:39 pm
- Forum: General support questions
- Topic: Engine Run On
- Replies: 1
- Views: 24649
Re: Engine Run On
It seems odd that an electronic device would cause such an issue, could you possibly disconnect the DASH2 and see if the running-on issue persists? Might have just been a coincidence that the issue occurred whilst fitting the dash, thanks.
- Wed Nov 24, 2021 6:28 pm
- Forum: General software support
- Topic: dash2 revs not reading correctly
- Replies: 5
- Views: 18109
Re: dash2 revs not reading correctly
Haven't seen that issue before, which vehicle (make, model & year) is the system installed on please?
- Tue Aug 10, 2021 9:57 am
- Forum: Installation questions
- Topic: Problem interfacing Omex600, DL1 and D2
- Replies: 7
- Views: 37805
Re: Problem interfacing Omex600, DL1 and D2
Hello Chris - Yes that's correct the OMEX 600 firmware must be 0.70D. For ECU communication you will need either the DL1 CLUB ECU license or our ECU Interface, do you know if you have either? If you have an invoice to hand, email it to daniel AT race - technology dot com so I can see exactly what eq...
- Tue Jul 27, 2021 9:49 am
- Forum: General software support
- Topic: DASH2 Boost Conversion - Autronic SM4
- Replies: 8
- Views: 21358
Re: DASH2 Boost Conversion - Autronic SM4
Mick email your DASH2 configuration to daniel AT race - technology DOT com and I will make the changes you require.
- Mon Jul 26, 2021 5:36 pm
- Forum: General software support
- Topic: DASH2 Boost Conversion - Autronic SM4
- Replies: 8
- Views: 21358
Re: DASH2 Boost Conversion - Autronic SM4
You can minus the 100 after the multiplier by typing '-100' in the lower box, however I don't think you'll need to do that. Try the 0.145 multiplier on it's own firstly then subtract the 100 if still reading absolute pressure.
- Fri Jul 23, 2021 10:53 am
- Forum: General software support
- Topic: DASH2 Boost Conversion - Autronic SM4
- Replies: 8
- Views: 21358
Re: DASH2 Boost Conversion - Autronic SM4
Sorry Mick misread the post. For the DASH2 standard running latest software you can enter the equation in either the Other Data Sources section or the ECU Interface section, depending on where the channel has been enabled. Set the Boost Pressure units to Custom then multiply by 0.145, I've attached ...
- Thu Jul 22, 2021 4:17 pm
- Forum: General software support
- Topic: DASH2 Boost Conversion - Autronic SM4
- Replies: 8
- Views: 21358
Re: DASH2 Boost Conversion - Autronic SM4
Hello mick - you can enter equations in the Variable Source section on the DASH2 PRO config utility. Read back the current config from the dash > open Variable Source section > scroll down to the General variable 1 and select the 'calculate from a combination of inputs using equation' box > in the n...
- Thu Jul 22, 2021 4:00 pm
- Forum: General support questions
- Topic: Dash 2 ,no display
- Replies: 8
- Views: 47286
Re: Dash 2 ,no display
Hi - it's difficult to say without the unit in front of me. Would you be able to post the dash to us for inspection? If yes, please email daniel AT race - technology DOT com and I'll provide a returns number.
Thank you
Thank you
- Thu Jul 01, 2021 12:13 pm
- Forum: General support questions
- Topic: Lap files
- Replies: 1
- Views: 24466
Re: Lap files
Hi Andy - Yes, download the V10 (RACING) software from our website, open the File Manager. There you can search for .LAP files and download them to your PC / memory card.
- Wed Jun 23, 2021 5:35 pm
- Forum: General support questions
- Topic: Dash 2 Screen Blank
- Replies: 1
- Views: 24370
Re: Dash 2 Screen Blank
Hi Mark - We can try a force reflash, do you have any buttons currently connected to the DASH2? We need to use the UP button in order to access the force reflash mode.