Search found 13 matches

by Tech Support (D)
Mon Nov 29, 2021 1:22 pm
Forum: Installation problems
Topic: dash2 revs not reading correctly
Replies: 5
Views: 378

Re: dash2 revs not reading correctly

Thanks for the car info, I'm not sure why the RPM from the OBDII port is reading as it is. However the best thing to do is take the RPM from a fuel injector instead. The data transmit over the OBDII port is very slow, it's not fast enough for RPM. Taking the signal from a fuel injector will give you...
by Tech Support (D)
Wed Nov 24, 2021 6:39 pm
Forum: General support questions
Topic: Engine Run On
Replies: 1
Views: 207

Re: Engine Run On

It seems odd that an electronic device would cause such an issue, could you possibly disconnect the DASH2 and see if the running-on issue persists? Might have just been a coincidence that the issue occurred whilst fitting the dash, thanks.
by Tech Support (D)
Wed Nov 24, 2021 6:28 pm
Forum: Installation problems
Topic: dash2 revs not reading correctly
Replies: 5
Views: 378

Re: dash2 revs not reading correctly

Haven't seen that issue before, which vehicle (make, model & year) is the system installed on please?
by Tech Support (D)
Tue Aug 10, 2021 9:57 am
Forum: Installation questions
Topic: Problem interfacing Omex600, DL1 and D2
Replies: 7
Views: 2747

Re: Problem interfacing Omex600, DL1 and D2

Hello Chris - Yes that's correct the OMEX 600 firmware must be 0.70D. For ECU communication you will need either the DL1 CLUB ECU license or our ECU Interface, do you know if you have either? If you have an invoice to hand, email it to daniel AT race - technology dot com so I can see exactly what eq...
by Tech Support (D)
Tue Jul 27, 2021 9:49 am
Forum: How do I...
Topic: DASH2 Boost Conversion - Autronic SM4
Replies: 8
Views: 3380

Re: DASH2 Boost Conversion - Autronic SM4

Mick email your DASH2 configuration to daniel AT race - technology DOT com and I will make the changes you require.
by Tech Support (D)
Mon Jul 26, 2021 5:36 pm
Forum: How do I...
Topic: DASH2 Boost Conversion - Autronic SM4
Replies: 8
Views: 3380

Re: DASH2 Boost Conversion - Autronic SM4

You can minus the 100 after the multiplier by typing '-100' in the lower box, however I don't think you'll need to do that. Try the 0.145 multiplier on it's own firstly then subtract the 100 if still reading absolute pressure.
by Tech Support (D)
Fri Jul 23, 2021 10:53 am
Forum: How do I...
Topic: DASH2 Boost Conversion - Autronic SM4
Replies: 8
Views: 3380

Re: DASH2 Boost Conversion - Autronic SM4

Sorry Mick misread the post. For the DASH2 standard running latest software you can enter the equation in either the Other Data Sources section or the ECU Interface section, depending on where the channel has been enabled. Set the Boost Pressure units to Custom then multiply by 0.145, I've attached ...
by Tech Support (D)
Thu Jul 22, 2021 4:17 pm
Forum: How do I...
Topic: DASH2 Boost Conversion - Autronic SM4
Replies: 8
Views: 3380

Re: DASH2 Boost Conversion - Autronic SM4

Hello mick - you can enter equations in the Variable Source section on the DASH2 PRO config utility. Read back the current config from the dash > open Variable Source section > scroll down to the General variable 1 and select the 'calculate from a combination of inputs using equation' box > in the n...
by Tech Support (D)
Thu Jul 22, 2021 4:00 pm
Forum: General support questions
Topic: Dash 2 ,no display
Replies: 8
Views: 1567

Re: Dash 2 ,no display

Hi - it's difficult to say without the unit in front of me. Would you be able to post the dash to us for inspection? If yes, please email daniel AT race - technology DOT com and I'll provide a returns number.

Thank you
by Tech Support (D)
Thu Jul 01, 2021 12:13 pm
Forum: General support questions
Topic: Lap files
Replies: 1
Views: 904

Re: Lap files

Hi Andy - Yes, download the V10 (RACING) software from our website, open the File Manager. There you can search for .LAP files and download them to your PC / memory card.
by Tech Support (D)
Wed Jun 23, 2021 5:35 pm
Forum: General support questions
Topic: Dash 2 Screen Blank
Replies: 1
Views: 882

Re: Dash 2 Screen Blank

Hi Mark - We can try a force reflash, do you have any buttons currently connected to the DASH2? We need to use the UP button in order to access the force reflash mode.
by Tech Support (D)
Tue Jun 01, 2021 1:29 pm
Forum: How do I...
Topic: Dash 4 Pro & DL1 Club - Speed events and Gear indicator
Replies: 1
Views: 1033

Re: Dash 4 Pro & DL1 Club - Speed events and Gear indicator

Hi Pete - If you could email me your DL1 CLUB & DASH4PRO configuration files, I will check the gear position settings for you. If you also send me a typical logged run from one of your hill climb / sprint sessions, I'll show you how to setup timing info. My address is daniel AT race - technology dot...
by Tech Support (D)
Tue May 18, 2021 10:10 am
Forum: Sensor-related questions
Topic: Fuel level dispaly
Replies: 3
Views: 3481

Re: Fuel level dispaly

Hello - The 100 ohm resistor is an issue, the DASH2 has a current limit of 50mA on the 5V reference output. The 100 ohm resistor will be causing the dash to run right on the limit, especially if you have other sensors connected to the unit as well. I recommend you replace the 100 ohm resistor with a...

Go to advanced search