Search found 10 matches

by Johannes.Kraut
Wed Aug 24, 2016 9:11 am
Forum: General support questions
Topic: DL1 Club USB connect
Replies: 7
Views: 11407

Re: DL1 Club USB connect

Thank you Sam!

I am back in the driving seat and the DL1 connected perfectly. I guess the main reason was my laptop used to have problems with update settings. It looks as if the chinese laptop usb connection was the issue and not the british DL1. :lol:

Thank you once again!

Cheers, Jan
by Johannes.Kraut
Mon Aug 22, 2016 5:54 pm
Forum: General support questions
Topic: DL1 Club USB connect
Replies: 7
Views: 11407

Re: DL1 Club USB connect

Hi,

with no sd card in the slot it starts with all 4 leds and after a second or two all but the powe led go off. There is not a single flash from the status led.

Regards, Jan
by Johannes.Kraut
Sat Aug 20, 2016 7:44 pm
Forum: General support questions
Topic: DL1 Club USB connect
Replies: 7
Views: 11407

Re: DL1 Club USB connect

Hey guys, I did not want to start a new topic as my problem is closed to this one. DL1MK3 powers up and the LEDs Show "Power on" and "GPS lock". Status is flashing its normal "I am fine" but does not change when the SD card is removed. I does not start logging or at lea...
by Johannes.Kraut
Wed Jul 27, 2016 1:05 pm
Forum: Sensor-related questions
Topic: Sensor recommndation for Amp?
Replies: 3
Views: 14592

Re: Sensor recommndation for Amp?

That looks almost too easy? I dont dare to ask if someone ever used this sensor?
by Johannes.Kraut
Mon Jul 25, 2016 5:08 pm
Forum: Sensor-related questions
Topic: Sensor recommndation for Amp?
Replies: 3
Views: 14592

Sensor recommndation for Amp?

Hey guys, actually I am looking for a way to check the energy consumption of my roadcar / now racecar. With the DL1 MK3 installed right next to the battery - why not log the data with the DL1? Is there any sensor on the market for this job? 0-50 A would be a good range, 0-100 A a perfect range. Than...
by Johannes.Kraut
Fri Mar 07, 2014 12:04 pm
Forum: Installation questions
Topic: DL1 MK3 + ECU can adaptor + Dash4 + Emerald K3 = No RPM
Replies: 4
Views: 16258

Solved!

I dumped the 1000 times edited setup file, took a fresh one, edited it and now it works. Thanks for your support anyway!
by Johannes.Kraut
Thu Mar 06, 2014 4:02 pm
Forum: Installation questions
Topic: DL1 MK3 + ECU can adaptor + Dash4 + Emerald K3 = No RPM
Replies: 4
Views: 16258

Did sound great - but it does not work. Maybe some more input helps: Logger options are: 16 serial 1 port enabled BUT 18-30 are not enabled, so no CAN port 1 etc. Is that a problem? I bought the DL1 with the ECU/OBD adapter that is connected to the "serial data in" port. Further setup: Ana...
by Johannes.Kraut
Tue Mar 04, 2014 5:23 pm
Forum: Installation questions
Topic: DL1 MK3 + ECU can adaptor + Dash4 + Emerald K3 = No RPM
Replies: 4
Views: 16258

DL1 MK3 + ECU can adaptor + Dash4 + Emerald K3 = No RPM

This is the hardware I have: DL1 MK3 Hardware version: 1 Bootloader version: 1.0.12 Main application version: 1.0.73 Configuration version: 4.0.22 "ECU can/ODB adaptor" "ECU can adaptor" is what is writen at the two stickers, no details about the flashed software. I received a ne...
by Johannes.Kraut
Tue Jan 07, 2014 9:14 am
Forum: Sensor-related questions
Topic: Lotus OEM ABS Sensors
Replies: 6
Views: 25739

Thanks for the quick answers. I am far away from brewing my own so I would have to take the VRS Signal conditioner.

On the other hand the conditioner costs more than twice the price of a wheel speed sensor. Lets see how easy they are to install.

Thanks a lot!
by Johannes.Kraut
Mon Jan 06, 2014 11:39 am
Forum: Sensor-related questions
Topic: Lotus OEM ABS Sensors
Replies: 6
Views: 25739

Lotus OEM ABS Sensors

Hello, I am racing a Lotus Elise without an ABS system on board and want to upgrade the informations the DL1 MK3 is gathering. For this reason I want to swap the current hub / wheel bearing without speed sensors to the ones with a speed sensor. Both bearings are identical because the later, Toyota p...

Go to advanced search