Search found 12 matches

by Walezy
Sun Nov 08, 2020 7:39 pm
Forum: General software support
Topic: dash2 with dl1 package reflashing
Replies: 3
Views: 10952

Re: dash2 with dl1 package reflashing

solved it. had to use different laptop with PCI express card rs232. this worked immediately. those usb adapters are terrible, you never know which one will work.
by Walezy
Sun Nov 08, 2020 2:16 pm
Forum: General software support
Topic: dash 2 odometer set up
Replies: 1
Views: 9664

dash 2 odometer set up

hi, installing my dash 2 in different car now. need to set it up so that it shows current odometer reading of the car(230k km or so) how to set up dash 2 so that it shows this reading. need to make it to be able to do MOT as if it shows less then it may be a problem during inspection.
by Walezy
Sun Nov 08, 2020 9:10 am
Forum: General software support
Topic: dash2 with dl1 package reflashing
Replies: 3
Views: 10952

Re: dash2 with dl1 package reflashing

i have just noticed that dash 2 is freezing after short while. it stops working after maybe 20seconds. all works fine and then dies. display shows all data but simply readings do not change.
by Walezy
Sun Nov 08, 2020 8:37 am
Forum: General software support
Topic: dash2 with dl1 package reflashing
Replies: 3
Views: 10952

dash2 with dl1 package reflashing

Hi, i have dash 2 that i bought in about 2008 and it came with dl1 mk2 linked with it. I want to reflash it all to newest firmware but whatever i do i cannot make it. I use USB Serial adapter with ch340 chipset set up at com 3, speed is 115200 , 8 bits , parity none, bit stop 1 , flow control(not su...
by Walezy
Mon Aug 22, 2011 8:50 pm
Forum: General support questions
Topic: Fuel and shift light questions
Replies: 4
Views: 7699

Well i did it to show me litres, i mean that it when i know how many litres are at the moment in the tank then i have to assign that value of litres to the volts that are taken from the input(hope this can be understood as english is not my native language :) ).
by Walezy
Mon Jun 06, 2011 12:13 pm
Forum: General support questions
Topic: Fuel and shift light questions
Replies: 4
Views: 7699

I just did the same thing last friday. Best is to put equation y=x into the dash 2 fuel gauge and then rear voltage every 5litres. then you have to put the values into table and it will generate the equation for you. works for me very well. i have calibrated it to show me litres not percentage of th...
by Walezy
Fri Jun 03, 2011 5:22 pm
Forum: General support questions
Topic: dash 2 lap times for open track - hillclimb or rally special
Replies: 5
Views: 8289

In that case it is a high time to make this upgrade in next firmware :)
by Walezy
Thu Jun 02, 2011 8:57 pm
Forum: General support questions
Topic: dash 2 lap times for open track - hillclimb or rally special
Replies: 5
Views: 8289

I have tested this. seems to work ok but how to make it so that the lap timer will start at the start of run marker and stop at end of run marker. I have the possibility to make a recon run so no problem to prepare lap file. i even have a run saved from that stage now so can do it now to have it rea...
by Walezy
Wed May 25, 2011 11:31 am
Forum: General support questions
Topic: dash 2 lap times for open track - hillclimb or rally special
Replies: 5
Views: 8289

any help? I have an event in 2 weeks coming.
by Walezy
Tue May 24, 2011 10:11 am
Forum: General support questions
Topic: dash 2 lap times for open track - hillclimb or rally special
Replies: 5
Views: 8289

dash 2 lap times for open track - hillclimb or rally special

I use my car for rallies and hillclimb so the track is open. Is it possible to have sector times set up to be displayed on the dash 2(i am using it with DL1)? I would like to get something like this: - make first run and record my time(start / finish coordinates taken from GPS) -next runs will be co...
by Walezy
Tue May 03, 2011 9:52 am
Forum: Sensor-related questions
Topic: DL1 does not read rpm above 8000revs
Replies: 2
Views: 7436

Thanks a lot, i am a rookie with that software.
by Walezy
Tue May 03, 2011 8:11 am
Forum: Sensor-related questions
Topic: DL1 does not read rpm above 8000revs
Replies: 2
Views: 7436

DL1 does not read rpm above 8000revs

I am using dash 2 with DL1 with honda s2000 f20c engine and i cannot read using dl1 revs over 8000revs in run file but the tachometer shows 9000without any problems. i get tacho input for dash 2 from dl1 so i have no idea what is wrong.

Go to advanced search