Search found 26 matches

by mebilloz
Fri Aug 20, 2021 5:01 am
Forum: Installation questions
Topic: Dash 2 Pro Accelerometer calibration
Replies: 1
Views: 615

Dash 2 Pro Accelerometer calibration

Hi All Just bought a Dash 2 Pro (2nd hand) and for 100 reasons this is installed 'off axis' for the accelerations. I had assumed I would be able to enter an off axis angle in 2 planes and it would 'deal with it'. Before I go off trying to write equations to resolve this, have I just failed to read t...
by mebilloz
Mon Apr 08, 2019 10:06 am
Forum: General support questions
Topic: Dash 2 channel name issue from DL1
Replies: 4
Views: 4956

Re: Dash 2 channel name issue from DL1

Well, who would have thought Windows VISTA had something going for it. Reformatted the card on the VISTA machine, and hey presto the DL1 now reads and writes to it. With that small victory, I also determined why the channel was not appearing, turns out at some long ago time, I disabled some unusued ...
by mebilloz
Sun Apr 07, 2019 11:17 pm
Forum: General support questions
Topic: Dash 2 channel name issue from DL1
Replies: 4
Views: 4956

Re: Dash 2 channel name issue from DL1

All my PC's are now Win 10. When formatting it gives an option of FAT, FAT32, NTFS. I thought FAT was OK? Or does Win 10 screw that up?
by mebilloz
Sun Apr 07, 2019 5:10 am
Forum: General support questions
Topic: Dash 2 channel name issue from DL1
Replies: 4
Views: 4956

Dash 2 channel name issue from DL1

Hi All I have had this problem previously, but this time I would like to resolve it if I can. I have a DL1 Mk 2, and a DASH 2 display in a Lotus 7 replica. I have just fitted a couple of brake rotor temp sensors (single channel each), 1 rear and 1 front. I set up the channels in the DASH 2 package a...
by mebilloz
Tue Dec 12, 2017 11:43 am
Forum: Installation questions
Topic: Powering DASH2
Replies: 2
Views: 8186

Re: Powering DASH2

Excellent, means I can tidy that area up a little and get rid of the cross coupling in the wire bundles :D
Cheers
Bill
by mebilloz
Tue Dec 12, 2017 2:27 am
Forum: Installation questions
Topic: Powering DASH2
Replies: 2
Views: 8186

Powering DASH2

Hi guys
Re-wiring my car so chasing advice on DASH2 power. There is a pwd and gnd on both plugs, are both needed, or can I simply power and gnd only one plug?
Ta
Bill
by mebilloz
Fri Sep 15, 2017 8:04 am
Forum: How do I...
Topic: Graph limits for default layout
Replies: 0
Views: 15560

Graph limits for default layout

With the multi-graph default section in Analysis, it always 'auto scales' and these cannot be manually set that I can see? Am I missing something simple?
Hopefully this below image clarifies.

Ta
Bill

Capture.PNG
Capture.PNG (11.79 KiB) Viewed 15560 times
by mebilloz
Sat Feb 20, 2016 7:14 am
Forum: General support questions
Topic: Setting up "Math Channels"
Replies: 2
Views: 3701

Thanks for the reply.

So does this mean that the use of the variable 'X' is equivalent to 'raw data in this channel'?

Just tried that version and it worked. Might be a nice add to the FAQ area or Infrequently asked??? :)

Thanks

Bill
by mebilloz
Thu Feb 18, 2016 5:08 am
Forum: General support questions
Topic: Setting up "Math Channels"
Replies: 2
Views: 3701

Setting up "Math Channels"

Hi Guys Recently I put a brake temp sensor on the car and in analysis was able to define an equation through variable manager, external input, pick that input and edit the Sensor type/units tab. I put an equation in of the form (var_0207-0.5)*200 which worked out fine. Now a couple of months later I...
by mebilloz
Tue Jan 19, 2016 5:44 am
Forum: How do I...
Topic: Data feed through to DL2 card
Replies: 1
Views: 5931

Data feed through to DL2 card

Hi All I remember reading about feeding a serial datastream straight through the DL2 to its data card, which is how my current ECU data is logged. The question is can I with an appropriately tagged data stream pass data through at a mush higher rate that the DL2 can capture normal data at. EG. An Ar...
by mebilloz
Sat Mar 09, 2013 10:19 am
Forum: General support questions
Topic: Gear calculation error with Analysis 8.5?
Replies: 1
Views: 3420

Gear calculation error with Analysis 8.5?

Hi all Just upgraded from Analysis 7.5 to 8.5. In general it has some nice features, pity I could not work out how to take my calibrations with me rather than having to re-enter them all, such is life. Just processed my first hillclimb for the season and there seems to be an issue with the gear indi...
by mebilloz
Thu Feb 07, 2013 8:27 pm
Forum: General support questions
Topic: GMT + Offset Displayed on DASH2
Replies: 10
Views: 12559

Thanks Martin, Looks like I am off to buy a little stick on clock :)

Cheers

Bill
by mebilloz
Thu Feb 07, 2013 12:12 pm
Forum: General support questions
Topic: GMT + Offset Displayed on DASH2
Replies: 10
Views: 12559

GMT + Offset Displayed on DASH2

There is an OLD thread about people wanting to view GMT from the Satalite + the local offset. At the time (2005) it seemed this was not possible, in 2013 with a DL1 and a DASH2, is it possible. If so, how to calculate the offset value? I had a play about 12 months ago and could not make sense of it ...
by mebilloz
Thu Jan 10, 2013 10:08 am
Forum: How do I...
Topic: Dynamic zoom
Replies: 2
Views: 4377

Thanks for the reply, but I was not specifically wanting to zoom into the track map itself, but a section of the data displays. For example, say I have Long accel, Lat accel, and rpm shown on screen for a lap of a track and I want to have a quick look a small section of this data in more detail. The...
by mebilloz
Thu Jan 10, 2013 6:42 am
Forum: How do I...
Topic: Dynamic zoom
Replies: 2
Views: 4377

Dynamic zoom

Hi All

In the 'General' window with data displayed (Using analysis 8.5) rather than adding track markers etc to split the data file up, is it possible to do a 'Dynamic Zoom' into an area of data?

I assume it can, just cannot seem to find it.

Thanks

Bill

Go to advanced search