How do I make Lite Monitor show RPM data? It does not show that rL signal data (by default).

Another update: My friend and I tried a whole bunch of configurations. One of them produced some data collection, although it seems unintelligible. We tried: not disabling RPM in DL1 config, hooking up the injector signal to rH, and hooking ground to rG. This produced some data, but I don't see how ...

Hey guys, So I've tried your suggestion to use the injector signal. I can confirm that the signal is much cleaner than the spark signal. It is still not reading any RPM data. I have made sure to Disable both RPM sampling rates in the DL1 configuration. Here is how I currently have it set up: -rG con...

PS - I have a scope at my workstation. I scoped the spark signal before, but never really paid attention to its amount of noise. This time I will, and I'll compare it to the injector signal's noise.

We have a custom ECM developed by a few team members 4 years ago, so that's what we use. When you say enable the DL1 for RPM data collection, what does this entail? I remember selecting/deselecting a checkbox in the configuration for the DL1, but is there more to it than that? I will try to pull the...

Hello, I'm on a college FSAE team and we're trying to get our DL1 to log RPM data. I have a test setup with a small motor that simulates the flywheel sensor. This signal tells my ECM to send the signal to the spark plugs. In the test setup I have taken the spark plug signals in inputted them into th...